Examples of 'ring gear' in a sentence
Meaning of "ring gear"
Ring gear refers to a gear component that has teeth on the outer circumference of a ring-shaped disk. It is often used in mechanical systems to transmit rotational motion or torque between two other gears or components. The ring gear can mesh with a smaller gear (known as a pinion gear) to transfer mechanical power in various applications, such as automotive transmissions or industrial machinery
How to use "ring gear" in a sentence
Basic
Advanced
ring gear
Ring gear before the next time.
The wheels are connected to the ring gear.
The ring gear is fixed against rotation.
The jacket and ring gear is the same.
A ring gear is typically coupled to the differential housing.
You got the ring gear.
Floating ring gear and differential gear assembly.
This drive member is for example a ring gear.
An outer ring gear is mounted in the gear box.
There is no requirement for a ring gear.
The pump is driven by a ring gear of the yawing system.
The ring gear provides the gear train output.
There is a risk of broken starter pinion or ring gear teeth.
The used ring gear is a layout with missing tooth.
Starter motor br to be connected to the ring gear of the engine.
See also
The tertiary ring gear forms a component of a torque clutch.
Method using powder metallurgy to manufacture a dog ring gear.
The ring gear also can include an internal toothing.
A pair of tabs are formed on the outside of the ring gear.
This ring gear is hardened and machined for a press fit.
The wave packets propagate through the ring gear material.
The turning of the ring gear occurs vÃa a gearwheel driven by an electromotor.
The gear wheels and the central ring gear are not shown.
An input drives a ring gear within the differential carrier assembly.
Operation of each tool segment is controlled by the rotation of the ring gear.
The ring gear likewise can serve for driving a winch.
Remove the chain from the ring gear and place it aside.
The ring gear is not rotating and fixed to the axle beam.
A motor drives the ring gear for rotating the frame.
The ring gear is typically engaged with all the planet gears.
The pitch linkage is directly operably coupled to the pitch ring gear.
Case and the ring gear to make sure there are no.
Precision forging said rings into near net ring gear forgings.
These driving means comprise a ring gear rigidly attached to the rim of the wheel.
A rotational inerter can be constructed by meshing a flywheel with the ring gear of a differential.
The ring gear may be held stationary relative to the container in any suitable manner.
A differential support case supports the ring gear and rotates therewith.
Illustrating the positive coupling system in position engaged with the ring gear.
A brake is also provided to constrain the ring gear in a released position of the clutch.
This error falls as the number of teeth of the measuring ring gear rises.
The ring gear is in driving engagement with a pinion gear coupled to a rotatable input member.
This inner set of teeth forms the ring gear of the epicyclic train.
The pinion gear engages the sun gear and the ring gear.
The support member carries the ring gear which meshingly engages a driving pinion.
The method can use a combination of beam angles to interrogate the ring gear.
The second free wheel may comprise a ring gear joined to the chain ring mounting.
The pinions engage with the sun gear and the ring gear.
The ring gear may provide axial and radial locations for the main bearing.
The pinion gear is engaged with the sun gear and the ring gear.
The steering wheel carries a ring gear which meshes with part of the pinion gear.
You'll also be interested in:
Examples of using Gear
Show more
Automatic start gear detection active or not
Gear choice for deceleration or cruise phases
Inspection of draw gear and chafing irons
Examples of using Ring
Show more
And place a ring upon her hand
Ring tones will not hold up in court
I had to go into the ring to finish it myself
