Examples of 'ring nut' in a sentence
Meaning of "ring nut"
Ring nut: A type of threaded nut with a circular shape, typically used to secure or tighten objects
How to use "ring nut" in a sentence
Basic
Advanced
ring nut
Loosen the ring nut by turning it counterclockwise.
Tighten the previously loosened ring nut.
Press the ring nut pawl downwards.
Remove the top ring nut.
Loosen the ring nut of the cappuccinatore.
Hoover upper basket ring nut.
Slacken the ring nut in an anticlockwise.
Tightly fit all the elements with the ring nut.
Turn the ring nut on the grinding head.
Unscrew the plug and the internal adjustment ring nut completely.
Fixing ring nut for the whole structure.
The external circumference of this ring nut presents a series of notches.
Springs ring nut with vibration intensity adjustment.
Hold the feed tube in place and tighten the ring nut.
Tighten the ring nut securely.
See also
The ring nut has a thread for tightening the connection.
Transfer ring nut piston.
The reference element is preferably a portion of a locking element of the ring nut.
Tighten the ring nut after pointing the hoses.
Them assembly the proper head and lock it with the corresponding ring nut loosen before.
Loosen the ring nut without slipping it off the cappuccinatore.
Insert wrench into hole provided in ring nut and unscrew to remove nut.
Press the ring nut into place under the steering.
Check the OR gasket inside the locking ring nut.
The internal adjustment ring nut must be only partially screwed.
Take up the play by means of ring nut F.
The aim of the ring nut is to adjust the stroke length.
Remove the plug, unscrew the nut and ring nut.
Gib head wrench for ring nut of clutch shaft inner body.
Fluid conveyance and / or distribution device with ring nut coupling.
Unscrew ring nut R and release the arms.
Use the spanner A to remove the ring nut if it is too tight.
Head Ring nut clamping head Tensile strength pushbutton.
If filter should leak, tighten ring nut with wrench until leak stops.
The ring nut is fastened with a safety screw, which must be previously.
Manufacturing the ring nut by injection moulding ;.
This ring nut must always be closed in order to act as a locking counter-nut.
Such annular-shaped element or ring nut is made in a single piece with the connector.
Insert a flat-blade screwdriver into one of the slots on the bulb ring nut.
Screw the internal adjustment ring nut until reaching the desired calibration value ; 6.
This operation is facilitated by the provision for making snap rotations of said ring nut 64.
To disconnect the hose, push the external ring nut of the quick coupler backward.
Composed of dual ferrule fittings, Before the snap ring, after the snap ring nut.
Loosen the adjustment ring nut on the pressure-reducing valve before opening the bottle valve.
The mixer comprises means for setting in rotation the ring nut 9 and therefore the beater.
Twist the ring nut onto the tomato juice attachment PIC . А.
Once regulation is completed, tighten the ring nut 3.
The ring nut could, however, be replaced by other equivalent means.
Using an appropriate wrench, unscrew the locking ring nut 3.
Holes 64 are provided in the ring nut for the injection needle.
You'll also be interested in:
Examples of using Nut
Show more
I am kind of a hard nut to crack in that department
A nut who knows a lot about bombs
Loosen the bottom nut to eliminate water
Examples of using Ring
Show more
And place a ring upon her hand
Ring tones will not hold up in court
I had to go into the ring to finish it myself
