Examples of 'ring signal' in a sentence
Meaning of "ring signal"
ring signal - This phrase refers to the sound or tone produced by a telephone or mobile device to indicate an incoming call. It is the auditory alert that notifies the user of an incoming communication, prompting them to answer or respond to the call
How to use "ring signal" in a sentence
Basic
Advanced
ring signal
There is a ring signal strength switch on the side of the telephone.
You can adjust the volume and speed of the ring signal in the same way.
The resulting ring signal causes a predictable impulse response on the reader antenna.
Press Silence and the ring signal is.
A ring signal is heard and the green mic indicators light to indicate the incoming call.
The detection signal is preferably a ring signal in the form of a decaying sine wave.
When someone calls, you can press Silent to turn off the handset ring signal.
You can pick up the telephone ring signal by using a telephone cable optionally available.
Press to answer, or press Silent to switch off the ring signal and then.
Ringer Set The ring signal of the base can be adjusted.
It also has the capability to emit alerting sounds, e.g. to sound a ring signal.
And Ring signal mode.
If I use this setting should amplify your ring signal trans-dimensionally.
After that, the ring signal will revert to the previous setting.
RI ( Ring Indicator ), DCE has detected an incoming ring signal on the telephone line.
See also
Typically, the ring signal is an AC voltage of a defined amplitude and frequency.
The apparatus of claim 1 wherein said ring signal generating means comprises,.
C, A ring signal is oscillated out to the loop.
During a standard call, a ring signal is then sent to the handset.
Ring signal turned off with the * key.
Ringer Set The handset 's ring signal and tones can be adjusted.
Select ring signal by pressing the number keys 0-9 in accordance with the.
The reader 12 may measure the frequency of the ring signal 22 and determine the sensed parameter.
Switch off ring signal ( in idle mode ) or microphone during a call.
Balanced configuration, sleeve ground ; tip signal + ; ring signal.
Select ring signal by pressing the number keys 0-9 in accordance with the table below.
The sensor 12 antenna thus emits a ring signal 16 at this frequency.
When the ring signal sounds ; press the On-hook key.
Such changes correspond to changes in the filtered ring signal 144.
Answer / End a call When the ring signal sounds ; press the Off-hook key to.
The ring signal detection circuit 10 operates a detection, selection and steering circuit 12.
The amplifier stages 86 amplify the ring signal 16 to a sufficient level to drive the PLL 30 input.
The PLL 30 receives the amplified and conditioned ring signal 16 from the receive circuitry 28.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Ring
Show more
And place a ring upon her hand
Ring tones will not hold up in court
I had to go into the ring to finish it myself
