Examples of 'rise time' in a sentence
Meaning of "rise time"
The phrase 'rise time' refers to the duration it takes for a parameter or signal to change from a lower value to a higher value. It is commonly used in technical or scientific contexts, especially in fields such as electronics, engineering, and control systems, to describe the transition time of a signal.
How to use "rise time" in a sentence
Basic
Advanced
rise time
The mean pressure rise time is calculated.
The rise time is basically a shape measure.
The units for rise time are seconds.
This greatly decreases the rise time.
Fast rise time steps are also used.
This time is called the rise time.
Fast rise time ensures an effective measurement.
Energy is maintained by a longer pulse rise time.
It measures the pressure rise time during combustion.
The rise time is directly related to the bandwidth.
A number proportional to the rise time.
Temperature rise time declared with cold packs.
A wind power plant with improved rise time.
The rise time may be determined in different ways.
Complete system rise time.
See also
The longest rise time shown in the table is.
The pulse stress capacity is the pulse rise time.
Pulse rise time discriminator.
Unsaturated photocurrent rise time.
Maximum rise time to toggle.
Photocurrent saturated rise time.
The rise time is configurable.
Generator output rise time.
A larger rise time of the switches becomes thus possible.
Discharge current rise time.
The rise time is high.
Mean pressure rise time.
The setting of the rise time influences the modulating behavior.
Tt is the pulse rise time.
Rise time of a pulse.
Time rise time.
The limitation of this method is the minimum system rise time.
The setting of the rise time infl uences the modulating behavior.
The current reaches its peak at the rise time trise.
The values on the pulse rise time refer to the rated voltage.
If the rise time is not within the expected limits an error is reported.
Set the timer for the amount of rise time in the recipe.
The sensor signals rise time is proportional to the hardness of the target.
These problems can easily be isolated using the rise time trigger.
The luminance rise time is shorter than the luminance decay time.
Specific account is taken of the finite rise time of the applied pulse.
To minimise the rise time of the current pulse induced by this charge transfer.
The scales of the amplitude axes and the rise time are free.
This pulse rise time is representative of the attenuation of the amplitude of said pulse.
This signal is characterized by a short rise time and long drop time.
The rise time filter allows only quickly changing electrical signals to pass.
In this manner a stress wave with a short rise time can be provided.
Note that the rise time of the oscillation is roughly the same as trise.
Specific criteria for command tracking include rise time and settling time.
The shorter the rise time the faster the actuator reaches the specified speed.
