Examples of 'risk of cracking' in a sentence
Meaning of "risk of cracking"
risk of cracking: This phrase is often used in engineering or material science to describe the potential for a substance or structure to develop cracks or fractures under certain conditions. It highlights the vulnerability of a material to failure or damage due to external forces or stress factors
How to use "risk of cracking" in a sentence
Basic
Advanced
risk of cracking
The risk of cracking is thereby further diminished.
Complicated castings have lower risk of cracking.
The risk of cracking is thereby further decreased.
Such material has a high risk of cracking.
There is a risk of cracking if left outside all winter.
Avoid intricate shapes as there will be risk of cracking.
This reduces the risk of cracking propellant grains.
His nails should be cut regularly to avoid any risk of cracking.
So at the risk of cracking these eggshells.
Provides the system with surface strength and avoids the risk of cracking.
This reduces the risk of cracking in the concrete.
Softening of copper and aluminum bars after bending to reduce the risk of cracking.
Less risk of cracking.
The thermal shielding prevents said overheating and consequently the risk of cracking.
No noise and without risk of cracking the fiberglass of the bathtub.
See also
It should be cooled slowly afterwards, to reduce risk of cracking.
The risk of cracking or bending of the trays is thereby reduced to a minimum.
This reduces the risk of cracking.
You took the risk of cracking up your plane by landing on field seven.
Otherwise the driveway will run the risk of cracking due to frost heaves.
There is also the risk of cracking of the deposited film during subsequent temperature cycling.
However, they are smaller and pose a risk of cracking over time.
This avoids the risk of cracking and breaking joints over the years.
Finally, a new experimental test is developed in order to evaluate the risk of cracking.
The relationship between thermal localisation and risk of cracking is then determined using thermomechanical modeling.
The risk of cracking is thus advantageously limited ;.
This further reduces the risk of cracking and / or wrinkling.
The risk of cracking is commensurately lower ;.
Furthermore, sugar coatings have a higher risk of cracking than do film coatings.
The risk of cracking of said ducts, and possible fuel leaks, is thereby limited.
They work best to do their intended task, but they inherently have a risk of cracking.
In other words, the risk of cracking increases with the thickness of the ring.
This way, temperature differences will be smaller and the risk of cracking will be minimised.
Therefore, there is no risk of cracking the head of the screw around the imprint.
Good elasticity of the coating . This property reduces the risk of cracking in wood.
Further, the risk of cracking on the exposed surface of the strips is reduced substantially.
Allows large-scale coatings of up to ~ 50 HRC without risk of cracking.
Okay . So at the risk of cracking these eggshells.
This way the risk of cracking e.g. a wooden construction element is minimised.
You'll also be interested in:
Examples of using Risk
Show more
Market risk measurement and limits in trading
Select and implement risk management system
You risk ripping the artery in half
Examples of using Cracking
Show more
Cracking of the test pieces is not allowed
The ice is cracking under the ship
Cracking due to old age of the insulation
