Examples of 'riving knife' in a sentence
Meaning of "riving knife"
A riving knife is a safety device used in woodworking. It is a metal plate or blade that is positioned on a table saw, aligned with the saw blade, and designed to prevent material from pinching or binding against the blade, reducing the risk of kickback or accidents
Show more definitions
- A tool for splitting shingles.
How to use "riving knife" in a sentence
Basic
Advanced
riving knife
Tighten the two riving knife screws.
The riving knife must not be removed.
Loosen the two riving knife screws.
The riving knife should be correctly set.
Make sure the riving knife is not.
The riving knife must always be used.
Use only the original riving knife.
A faulty riving knife must be replaced immediately.
Workpiece and lower the riving knife.
Ensure the riving knife is not bent.
Riving knife is favored to safeguard against kickback.
Adjusting the riving knife for ripping.
Riving knife must be replaced after plunge cutting.
Always use the supplied riving knife.
Tighten the riving knife adjustment screw v.
See also
Always work with a properly set riving knife.
The riving knife should always be used.
Make sure that the riving knife is secured in.
The riving knife is slotted for easy removal.
Do not operate the saw if riving knife is bent.
Riving knife must be replaced after plunce cutting.
Tighten the riving knife screw r.
Riving knife is properly aligned with saw blade.
Ensure that the riving knife is adjusted so that.
Riving knife to its maximum length.
To check the riving knife alignment.
Always push the workpiece up to the riving knife.
Always have riving knife installed during operation.
Only when realignment of the riving knife is necessary.
Or the riving knife is not being used.
Do not remove the riving knife.
Use the riving knife provided.
Smaller than the thickness of the riving knife.
Removing the riving knife assembly.
The riving knife should always be used except when.
Machine without the riving knife.
Adjust the riving knife as described in this instruction manual.
Lift and slide the riving knife from saw.
Adjust the riving knife as described in the operating instructions.
The saw blade is thicker than the riving knife.
Sure that the riving knife has been mounted.
Tighten the nut without moving the riving knife.
Reinstall the riving knife and top blade guard.
These screws will be used to adjust the riving knife position.
Inspect the riving knife regularly and replace it if it is worn.
The workpieces is jamming against the riving knife during processing.
Adjust the riving knife up and out of the way.
Additional safety instructions for all saws with riving knife a.
Ensure that the riving knife is adjusted such that.
Do not operate saw without guards and riving knife in place.
You'll also be interested in:
Examples of using Knife
Show more
That knife he pulled on me did not look so harmless
You just brought a knife to a gun fight
The knife is old and could be dirty
Examples of using Riving
Show more
Tighten the two riving knife screws
The riving knife must not be removed
Loosen the two riving knife screws
