Examples of 'rmax' in a sentence
Meaning of "rmax"
Rmax (adjective): Refers to the maximum radius or distance at which a radar system or other technology can detect, track, or communicate with objects or signals. This term is commonly used in engineering, aviation, and military contexts to describe the capabilities of surveillance or communication systems
How to use "rmax" in a sentence
Basic
Advanced
rmax
Rmax was calculated according to the following method.
In the second time slot the maximum tone ratio rmax is transmitted.
Rmax is the maximum value of the range.
It is assumed that the user has purchased a certain data rate rmax from his operator.
Rmax is the maximum height of the irregularities of said profile.
These outcomes resulted in increased values of Rmax.
Rmax to increase the grade.
The integrated mass within some radius Rmax is.
Rmax is higher than the average rate of the bit stream.
The surface roughness is expressed as Rmax.
The rmax and rmin values were measured based on the type of the centrifuge used.
For each slice the maximum resistance Rmax in the series of m measurements is determined.
The Rmax values are small and inhomogeneous in the temperature gradient.
The internal surface roughness Rmax.
The rmax and rmin values can be measured as shown in FIG.
See also
That is if you want Rmax.
The maximum surface roughness Rmax is the maximum value of these five single measurements.
After normalization of the curves from time zero to Rmax see Fig.
Rmax is a maximum quality of estimation ;.
Since no equilibriums achieved these estimated Rmax values are rather error-prone.
Rmax is the maximum range, from which the sensitivity is still at a maximum.
The procedure is repeated until the R'max is equal to or higher than Rmax.
That is, Rmax means a maximum vertical distance of a surface factor.
For example, the internal radius Rint is equal to one-third of the maximum radius Rmax.
The antigen kinetics accelerates, too, and the antigen Rmax values increase with increasing temperature.
Rmax - The highest score measured using the LINPACK benchmark suite.
The surface roughness may be further described by the parameters Ra, Rz and Rmax.
Rmax = maximum separation on the 5 unit sectors.
The distance L between supports may be estimated as a function of the maximum wing radius, Rmax.
Rmax is the maximum peak-to-valley height with in a sampling length.
In most applications, the ratio R varies between a minimum value Rmin and a maximum value Rmax.
A surface roughness after roughening with Rmax in the range of 5 - 40 micrometers is suitable.
The upper reference value R2 is set to be larger than R and smaller than Rmax.
The surface roughness Rmax of the inside surface of the inner layer was 0.8 µm.
Of the inner surface and 85 µ m in roughness Rmax.
For instance, if Rmax is lower than normal, the blinds are not fully opened.
The maximum number of reconstruction levels is Rmax = 8.
In some experiments the Rmax was fitted locally, and the RI constant at 0.
Ideally, the µEDM deburring device produces maximum surface roughness, Rmax of less than about 30 nanometers.
The Rmax of each conjugate is additive and therefore the total Rmax of solution B is 1007.
A surface analyzer was used to record Ra, Ry, and Rmax.
These estimates are subject to the caveat that rmax may have changed since the mid-1990s.
In the TOP500 list table, the computers are ordered first by their Rmax value.
The surface roughness Rmax of the inner layer was 124 µm.
In another embodiment of the inventive pin arrangement it shall apply, r2 > rmax and r3 > rmax.
As to the surface roughness, Rmax and Rmax * of the ground surface were 1.0 µm.
The internal radius Rint consequently lies in the range 0.2 to 0.4 times the maximum radius Rmax.
By such the undercoating treatment, surface roughness Rmax is preferably 5 to 40 µm.
In block 112, the subscriber station determines the parameters Rmin and Rmax.
N1/2, the size where half the Rmax execution rate is achieved.
