Examples of 'rocker arm' in a sentence
Meaning of "rocker arm"
A component in an engine's valve train system that is responsible for opening and closing the valves
How to use "rocker arm" in a sentence
Basic
Advanced
rocker arm
The rocker arm crystallized and snapped.
It was operated by a push rod and a rocker arm.
Check rocker arm to valve clearance and adjust.
No locknut is used on this type of rocker arm.
Remove the rocker arm cover and gasket.
You have to buy the whole rocker arm.
Rocker arm cam bridge complete.
Rear suspension rocker arm with.
A trigger rocker arm is disposed in the actuation housing.
I want you to pull the rocker arm shaft.
Reinstall the rocker arm cover using a new gasket.
These were actuated by a single push rod and rocker arm.
Rocker arm suspension was used.
The other end of the rocker arm carries a counterweight.
Rocker arm shaft.
See also
The purpose of the rocker arm plunger is to eliminate all.
Rocker arm ways.
Foot lever or rocker arm.
The first rocker arm is supported by the rocker shaft.
The movement of this support can be obtained by means of a rocker arm.
Such a rocker arm assembly is expensive and difficult to manufacture.
Slide the feeler gauge between the rocker arm and the.
The rocker arm shaft can thus be continually lubricated by splashing.
That shock absorber is for main landing gear including a rocker arm.
Second intake side rocker arm that is second rocker arm.
A rocker arm braking device for doors and sliding furniture doors.
Locking means is provided to lock the plunger to the first rocker arm.
The first rocker arm includes a roller and a pressing member.
The pressing member may be integrally provided on the first rocker arm.
One thus obtains a rocker arm control device which operates as follows.
A first end of the connecting rod is pivotally secured to the rocker arm.
Hinge allows a rocker arm to rock relative to the structure of the aircraft.
This plate is immobilised by means of a rocker arm which rests on the bolt.
The machine may also comprise a connecting piece and a rocker arm.
A roller rocker is a rocker arm that uses bearings instead of metal sliding on metal.
The curved guide means has a extended second end which cantilevers outwardly from the rocker arm.
One primary intake rocker arm corresponds to each secondary intake rocker arm.
Use with OEM or stock replacement rocker arm shafts.
Hold the rocker arm jam nut in place as the pivot ball stud is turned.
Place the feeler gauge under each rocker arm and measure the gap.
Mark respective rocker arm with chalk to show that adjustment has been carried out.
The mounting and engagement pins between ruler and rocker arm may also be configured differently.
Actually the rocker arm is coupled with clearance to the drive appendage of the electromagnet.
Slide the feeler gauge between the rocker arm and the valve return spring.
The second rocker arm includes a second attachment portion and a second contact portion.
The main thing I am worried about is the rocker arm breaking.
The body of the rocker arm receives load from the cam vía the roller.
The Valves are opened mechanically by pressure being applied to them by a Rocker Arm.
The jacket separates from the rocker arm by sliding clear or lifting off.
The rocker arm may therefore be subject to a more rapid displacement than the other parts.
You'll also be interested in:
Examples of using Arm
Show more
I got my arm mangled for absolutely nothing
The cat clung to my arm like a vise
Motor arm will then pivot upward
Examples of using Rocker
Show more
Rocker switch for the seat ventilation
Us sitting in a rocker with a lot of gray hair
Rocker switch for front seat heating
