Examples of 'roller brush' in a sentence
Meaning of "roller brush"
This phrase refers to a brush or tool with a cylindrical shape and bristles attached to its surface. It is commonly used in cleaning or painting contexts, where the roller brush is rolled over a surface to apply paint, remove dirt, or perform other tasks efficiently
How to use "roller brush" in a sentence
Basic
Advanced
roller brush
Remove the roller brush halves and re.
Remove belts or cords from roller brush.
Than the roller brush have to be cleaned.
Check the height adjustment of the roller brush.
Replacing the roller brush drive belt.
Never reach into the rotating roller brush.
The rotating roller brush and injure.
You can do this yourself by using a roller brush.
Industrial paint roller brush painting brush an.
The roller brush is blocked by fabric or surfaces during cleaning.
The rotation of the roller brush intensi.
The roller brush may then need to be cleaned.
When refitting the roller brush please note.
The roller brush of this invention can be made of elastomer.
Remove the roller brush cover.
See also
Carefully remove all leftover dirt on the roller brush.
Never touch the roller brush while it is rotating.
Hazard caused by ejected parts with moving roller brush.
Pull up the roller brush until it.
Use scissors to cut any threads or hairs which have wound around the roller brush.
It has a rotating roller brush which is.
The first roller brush may be disposed substantially near a forward edge of the chassis.
Release the lever for roller brush drive.
Clean the roller brush and the side brushes.
Switch off the appliance and check the roller brush for obstructions.
Check the roller brush for the proper seat.
When vacuuming with a Miele Powerbrush or Turbobrush do not touch the rotating roller brush.
Check the roller brush for wear and.
If this happens, follow the steps below to clean the roller brush.
The height of the roller brush is adjusted via a rotary knob.
After replacement of the belt, insert both supports of the roller brush into the.
The stop protection of roller brush is necessary in order to avoid injury.
At the endpart of the rectangular área, the coating pressure feed roller brush stops.
This will enable the roller brush safety mechanism to reset itself.
Regularly use a vacuum cleaner with high vacuum power, a roller brush and a HEPA filter ;.
Replace the roller brush and make sure it can spin freely.
Clean the inside area around the roller brush at the same time.
Revolutionary new roller brush and sealed floorhead design deliver unrivalled cleaning.
With such a construction, the support displaces the roller brush in conformity with a coated surface.
With the tufted roller brush you are selecting one of our most versatile products.
With time, hair, threads, or other contaminations can collect on the roller brush.
Release clutch lever for roller brush drive and travel drive.
If the roller brush becomes blocked or jammed for any reason, the.
Ensure that the recesses of the roller brush halves point towards the dog.
Grasp the roller brush support carefully at the belt side and remove it from the.
To remove these, remove the roller brush from the appliance.
Set the roller brush to the proper height, using the height adjustment.
Note, You can also remove the roller brush for easier cleaning.
If the roller brush needs to be lifted out - open the hatch cover by turning.
Features of the Electrobrush The roller brush in the Electrobrush is motor-driven.
You'll also be interested in:
Examples of using Roller
Show more
Remove the roller brush halves and re
You can count this high roller in
Turn roller adjustment screw to lower door
Examples of using Brush
Show more
Brush off accumulation of dust on the base
Arrange for a brush pass in the medinah
Brush occasionally with melted butter or margarine
