Examples of 'room sensor' in a sentence
Meaning of "room sensor"
A room sensor is a device that is used to detect and monitor various environmental parameters within a room. These sensors can measure factors such as temperature, humidity, light levels, and air quality. They are commonly used in smart homes and buildings to automate control systems, optimize energy efficiency, and provide a comfortable living or working environment
How to use "room sensor" in a sentence
Basic
Advanced
room sensor
Room sensor or remote room control unit if present.
This symbol is highlighted if a functioning room sensor is connected.
A room sensor is incorporated in each wireless remote controller.
Confi gured for remote room sensor or limit.
The room sensor is used for monitoring room temperature.
The wireless remote controller is not set as room sensor.
Set desired value of duct and room sensor and thermostats above the respective ambient temperature.
The thermostat is now set to combined floor and room sensor.
Room sensor for controller RF only.
Set circuit address chosen with the room sensor wheel.
Robotic room Sensor network Life log.
The comfort mode can only be selected if a functioning room sensor is connected.
Room sensor needs to be situated in a " representative " place for the room temperature.
The frost protection function can only be activated with connected room sensor.
It is possible to disable the remote controller room sensor pressing the I FEEL button.
See also
The underfloor heating will now be controlled by the signal from the room sensor.
An optional room sensor can be connected to UI1.
There is no valid signal between the stove control system and the room sensor.
Note, Room sensor can be selected by main controller only.
Plug together the cable of the optional wireless room sensor with the cable connection.
When is shown, this indicates that the wireless remote controller is set as room sensor.
Room sensor, Radio room sensor This option permits control of your stove via room temperature.
The comfort mode may only be selected if a RIKA room sensor is connected.
Room, With this setting, the room sensor built into the thermostat controls the heating system.
MyHome Alarm - heat pump control and room sensor.
Only with RIKA room sensor / RIKA radio room sensor.
Display of the current ACTUAL temperature in the room [ C ] only with connected room sensor.
Check if the ( radio ) room sensor is connected properly.
Room sensor configurations?
External setpoint can be used for control modes 1-3 and control mode 4 when using a room sensor.
Room temperature sensor ( s ) An optional room sensor can be connected to UI1.
If room sensor error is active, E1 will blink.
Meaning No signal to the ( radio ) room sensor.
Code, b 0 without room sensor 2 with room sensor.
Fig . 17 Recommended installation location for room sensor.
External room sensor ( connected by cable ).
Room, The built-in room sensor is used.
Floor sensor ( FL ) Room sensor ( RO ) Combined use of room and floor sensor CO.
You'll also be interested in:
Examples of using Sensor
Show more
Search for the sensor or check batteries
Sensor readings and radio communications are terminated
An integrated light sensor also measures brightness
Examples of using Room
Show more
I like room service and indoor plumbing
Sometimes it comes down to two men in a room
The room has a heat recovery system
