Examples of 'root bridge' in a sentence
Meaning of "root bridge"
Root bridge: A type of network bridge device that is used in computer networks to efficiently route data between different network segments
How to use "root bridge" in a sentence
Basic
Advanced
root bridge
All ports on a root bridge is designated ports.
A tree network must have a root bridge.
Root bridge generation using conventional structures as scaffolding.
Lowest path cost to the root bridge.
Root bridge generation using a wood or bamboo scaffold.
Enable rootgaurd feature to prevent root bridge changes.
The Root Bridge becomes the focal point in the network.
It assumes itself to be the root bridge.
This switch must be the root bridge for all VLANs on this switch.
The designated port is the port closest to the root bridge.
The bridge notifies the root bridge of the spanning tree.
Every segment will have a single path to the root bridge.
But the process of growing a living root bridge is neither short nor simple.
The output shows that the switch is the root bridge.
The segment attached to the root bridge will normally have a path cost of zero.
See also
Method of and device for recovering from a root bridge failure.
The Root Bridge identifies whether the received TCEs represent a potential loop.
The algorithm typically computes the shortest path from all segments to an elected root bridge.
Root bridge generation using Areca Palm trunks.
The bridge with the lowest bridge ID is selected as the root bridge.
On this root bridge the preferred and non-preferred links are calculated.
This LAN and the root bridge.
The root bridge should be explicitly defined as close to the MDF (core) as possible.
The MAC address of the root bridge.
The STA elects a single root bridge in the whole bridged network ( per-VLAN ).
Designated Root The bridge identifier of the root bridge.
A young fisherman walks under a living root bridge at Mawlynnong village, India.
One of the Bridges in the network is elected as the Root Bridge.
The link between Switch A and the root bridge is blocked, and both bridges exchange BPDUs.
In this way, the root guard enforces the position of the root bridge.
Method for notifying bridges connected to a network of a root bridge failure, comprising the following steps,.
The switch with the lowest mac-address value would be elected as the root bridge.
Configure DSW2 as the secondary Root Bridge for all VLANs.
This port sends BPDUs on the link ( segment ) and forwards traffic towards the root bridge.
In other words, the process of knitting a root bridge takes approximately 26 years.
As an example, the bridge I is defined as being the root bridge.
A mature root bridge can stretch up to 250 feet long.
Which of the following statements are true regarding a root bridge in a spanning tree topology?
Implementations based on Rule Set 2, 3 or 4 do not depend on a traditional Root Bridge role.
SW1 is the root bridge.
The method of claim 1, wherein the attributes are declared at a root bridge of the tree.
Double - Decker root bridge.
Alternate - An alternate path to the root bridge.
Received BPDU messages are analyzed to see if a “ better ” Root Bridge is being announced.
The method of claim 1, wherein declaration determination is made at a root bridge of the tree.
Root BID - This is the BID of the current root bridge.
The method of claim 17, wherein the network entity is a root bridge of the tree.
