Examples of 'rotary speed' in a sentence
Meaning of "rotary speed"
rotary speed - This phrase refers to the speed of rotation or revolution around an axis, typically used in the context of machinery or engines
How to use "rotary speed" in a sentence
Basic
Advanced
rotary speed
This results in a constant rotary speed.
It is possible to simulate rotary speed and pressure of string given to wellbore wall.
Map of the angle shifting regarding engine rotary speed.
Never change the preset rotary speed or the engine and product settings.
The particle dimension decreases as a function of the rotary speed of the disk.
The value of the low rotary speed OSmin depends on the value of measured unbalance.
All samples were evaporated to dryness in a rotary speed vacuum system.
A rotary speed and / or position of the rotor can also be used for that purpose.
The JetBlack may also have a rotary speed control fitted.
Accordingly more kinetic energy can be stored by an increase in the rotary speed.
Method and system for controlling the rotary speed stability of a drill bit.
The position of each loop is controlled by variations in the corresponding winder rotary speed.
Means for altering the rotary speed of the cylinders ;.
Further preferably it is about 1 rpm higher than the optimum rotary speed.
At this point on the workpiece the rotary speed is determined by the following equation,.
See also
One important factor to consider when choosing clippers is the Rotary Speed Per Minute.
Preferably, the target rotary speed is the rotary speed that maximizes the laundry drop height.
The speed of grooming clippers is called the rotary speed per minute.
The rotary speed control can be used in the Auto-Change Mode.
It is necessary to provide the actual value of engine rotary speed before starting scanning.
In a fourth step S 4 the rotary speed and deceleration of the installation can be ascertained.
The aim is therefore always to work at the maximum rotary speed of the rolls.
Curve 16 represents the rotary speed of the drill bit as a function of time.
For instance, the parameter can be the rotary speed itself.
Rotary speed of screw, 60 revolutions per minute.
Devices with limit values can be used for monitoring rotary speed or rate of production.
Their rotary speed can vary from 0 to 360 revolutions per minute.
Yeah, let us crank up the rotary speed a bit.
The friction means are determined to generate a friction curve 18 which increases with the rotary speed.
Top-drive head has wide range of rotary speed to meet varying layer and.
A momentary mono footswitch will allow effect defeat ( bypass or mute ) or rotary speed toggle.
When the motor rotary speed changes 2.
The power supply may also be separated from, for example, a digital rotary speed control system.
Each rotary speed reduction stage 25 comprises gears arranged in a flat casing 22.
Speed display 6 Speed control Infi nitely variable rotary speed only in conjunction with button 7a.
Such a circulating device ( 6 ) is preferably a propeller involving a slow rotary speed.
The coating pan is driven at a rotary speed comprised between 22 and 25 rpm.
A measuring and monitoring device 24 controls adjusting means 25 according to the measurement of the rotary speed.
First measurement is made after acceleration of rotary speed of a drum up to 70 r / s.
Therefore, the CPU 20 controls the motor 25 to rotate at a fixed rotary speed.
Yeah, let's crank up the rotary speed a bit. Hand me the C spanner.
Means ( 128 ) for providing a rotor speed signal indicative of the rotary speed of said rotor ;.
Additional programmable variables include pressure, temperature, rotary speed ( if applicable ) and water level.
You'll also be interested in:
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
Examples of using Rotary
Show more
Rotary switch for choice of battery type
Set the middle rotary switch to min
Rotary encoder with mounted stator coupling
