Examples of 'rotate counterclockwise' in a sentence
Meaning of "rotate counterclockwise"
rotate counterclockwise: To turn or spin in an anticlockwise or anti-clockwise direction. This phrase is often used in instructions for operating machinery, adjusting settings, or engaging in activities that require a specific direction of rotation
How to use "rotate counterclockwise" in a sentence
Basic
Advanced
rotate counterclockwise
Rotate counterclockwise to turn the system off.
Push bulb down and rotate counterclockwise to remove.
Rotate counterclockwise to increase engine speed.
The motor first stops and then begins to rotate counterclockwise.
Rotate counterclockwise the knob located on the lower.
Tools fitted on Honda brushcutters rotate counterclockwise.
Rotate counterclockwise to decrease the volume.
The entire heavens seem to rotate counterclockwise around Polaris.
Rotate counterclockwise to reduce the volume and rotate clockwise to increase the volume.
So hurricanes and typhoons in the Northern Hemisphere rotate counterclockwise.
Key to rotate counterclockwise.
To check or replace fuse, push fuse cap in and rotate counterclockwise.
The motor should rotate counterclockwise when viewing the plane from the front.
When you feel there is too much treble, rotate counterclockwise to suppress.
Rotate Clockwise and Rotate Counterclockwise rotate the selected object ninety degrees in the indicated direction.
See also
To loosen side handle, rotate counterclockwise.
Or the Rotate Counterclockwise button in the toolbar.
Still, it wants to rotate counterclockwise.
Rotate counterclockwise during playback ( off position ) for a slow winding down effect.
Grasp pre-filter and rotate counterclockwise to remove.
Then, in this state, the paper feed rollers 3 start to rotate counterclockwise.
Grasp primary filter, rotate counterclockwise and lift out.
The other one way clutch 307 would slip if the mounting tube could rotate counterclockwise.
Grasp filter screen, rotate counterclockwise and lift out.
The second lever 15 causes the movable panel 17 to rotate counterclockwise.
Spindles that rotate counterclockwise have right-leading threading.
When you feel excessive treble sound, rotate counterclockwise to suppress.
Spindles that rotate counterclockwise have left-leading threading.
This causes the eccentric cam 50 to rotate counterclockwise.
Place handle on stem and rotate counterclockwise approximately 1/4 turn after the stop has been contacted.
This causes the release cam 70 to rotate counterclockwise.
Loaded operation, but it may rotate counterclockwise during the no-load operation.
Next, the processor 40 causes the carrier motor 5 to rotate counterclockwise.
It is the only planet to rotate counterclockwise and does so in over 220 days.
The first idler gear 72 causes the lower drive gear 52 to rotate counterclockwise.
To remove the old filter, rotate counterclockwise one - quarter turn, then pull out.
In this embodiment, the movement of first member 200 downward causes toothed wheel 240 to rotate counterclockwise.
The drive shaft 77 is structured to rotate counterclockwise as seen from the left.
It 's caught up on something . Rotate counterclockwise.
For more heat, press knob and rotate counterclockwise to HIGH setting.
Insert end of hose ( G ) into twist-lock hose inlet ( J ) and rotate counterclockwise to lock in place.
Lift D-ring up and rotate counterclockwise 90 degrees.
When you feel excessive bass sound, rotate counterclockwise to suppress.
When you feel there is too much bass, rotate counterclockwise to suppress.
Put the wire spool ( 2 ) on the hub to rotate counterclockwise as the wire is unwounded.
You'll also be interested in:
Examples of using Counterclockwise
Show more
Turn knobs counterclockwise to light main burners
Push the knob in and turn it counterclockwise
Turn bulb counterclockwise to remove from socket
Examples of using Rotate
Show more
Rotate the blade so it falls into place on
You can not rotate the movies
Rotate the pulley to be sure it spins freely
