Examples of 'rotate the blade' in a sentence
Meaning of "rotate the blade"
To 'rotate the blade' means to turn or spin the sharp part of a cutting tool, such as a knife or a saw. This action is generally performed in order to change the position or orientation of the blade, allowing for different cutting angles or directions. Rotating the blade can be necessary during various tasks, ranging from cooking and food preparation to woodworking or other manual labor activities
How to use "rotate the blade" in a sentence
Basic
Advanced
rotate the blade
Rotate the blade so it falls into place on.
It may be necessary to rotate the blade until it falls into place.
Rotate the blade until the spindle locks.
Depress the spindle lock button and rotate the blade bolt until the spindle locks.
And rotate the blade unit in clockwise direction.
Press the spindle lock button and rotate the blade bolt until the spindle locks.
Rotate the blade by hand to make sure it turns freely.
Press the shaft slightly and rotate the blade until the Spindle interlocksystem clicks.
Rotate the blade shaft until a blade can be seen.
Upon the flanks, rotate the blade insert.
Rotate the blade by hand to check that it rotates freely.
Once installed, rotate the blade drum to ensure.
Rotate the blade clamp counterclockwise and hold to open.
To remove the blade, rotate the blade clamp counterclockwise.
Rotate the blade nearest the discharge chute so that it is.
See also
Press the lock lever ( m ) down and rotate the blade until the lock position is found.
Rotate the blade attachment all the way in a clockwise direction.
Press the lock lever ( M ) down and rotate the blade until the lock.
They rotate the blade of each oar on each stroke.
To use the last edge, rotate the blade end-for-end.
Rotate the blade until it rests on the bottom of the bowl.
In this manner, the actuating means 100 are adapted to translate and rotate the blade holder 7.
Rotate the blade so it falls into place on the power shaft.
To safely store, simply rotate the blade guard back into position until it locks.
Rotate the blade as necessary to align its star hole with.
In this case, rotate the blade clamp lever fully again, then make sure that.
Rotate the blade tilting wheel and use the bevel scale.
Rotate the blade nearest the discharge chute so that it is parallel with the tractor.
Rotate the blade height adjustment wheel to lift the motor to its highest position.
Rotate the blade tensioning lever clockwise until it stops, as.
Rotate the blade by hand and check the blade-to-table alignment at several points.
Rotate the blade drum 9 by hand and ensure that the planer blade does not graze.
Rotate the blade tension lever ( H ) clockwise until it stops to release tension in blade.
Rotate the blade tension lever ( H ) counterclockwise until it stops and then gently turn the.
Rotate the blade installing lever in the ( 4 ) direction until it stops.
Rotate the blade head 13 manually and ensure that the planer blades do not graze.
Rotate the blade head by a further 180o and repeat the procedure disassembling the second plane blade.
Rotate the blade tension lever (I) counterclockwise until it stops.
Rotate the blade tension lever ( I ) clockwise until it stops to.
Rotate the blade drum 180 degrees and repeat for other.
Then rotate the blade installing lever to its original position . Fig . 20.
You'll also be interested in:
Examples of using Rotate
Show more
Rotate the blade so it falls into place on
You can not rotate the movies
Rotate the pulley to be sure it spins freely
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
