Examples of 'rotated clockwise' in a sentence
Meaning of "rotated clockwise"
rotated clockwise: This phrase indicates the direction of rotation around an axis in a clockwise manner, typically described in mechanical or spatial contexts
How to use "rotated clockwise" in a sentence
Basic
Advanced
rotated clockwise
View the image rotated clockwise.
The sleeve 50 is rotated clockwise or counterclockwise depending on the desired axial direction of displacement.
Thereby the associated floor element is also rotated clockwise.
The samples are rotated clockwise ninety degrees per measurement.
When setting a dose the dose setting member is rotated clockwise.
The thermostat should be rotated clockwise in order to reduce the temperature.
The arc is made of separate blocks that have been rotated clockwise.
Wheel can be rotated clockwise and counterclockwise to adjust the wattage.
The page turning roller 7 is thereby rotated clockwise.
The cap should be rotated clockwise or counter clockwise one full turn.
The artery was then lifted, and the wire rotated clockwise.
Needles were manually inserted and rotated clockwise and counterclockwise until patients reported deqi sensation.
If it is a new failure, the DP is rotated clockwise.
RV carousel is rotated clockwise until an Rv is detected in pipette axis position.
When writing vertically, brackets are rotated clockwise ninety degrees.
See also
The handwheel 4 is rotated clockwise from the centered position by applying a clockwise breakout force.
The prism can be set to an indexed position or rotated clockwise or counter-clockwise.
The display is rotated clockwise or counter-clockwise in 90 increments.
It had four Single Patent sails, which rotated clockwise.
As the Treble control is rotated clockwise the sound will become brighter.
The spring 11 is elastically urged to be rotated clockwise.
Reduction instrument is rotated clockwise relative to its Fig.
About 70 % of headstones at a nearby cemetery were found to have been rotated clockwise.
The stirrer cover can now be rotated clockwise slightly to the left.
Rotation of the shaft 98 in a clockwise direction will result in the roller 42 being rotated clockwise.
As the Tone control is rotated clockwise the sound will become brighter.
The view in Fig.3 with the two blades rotated clockwise.
The Dial will need to be rotated clockwise completely before selecting the desired time.
Similarly, when the electric motor is positively rotated, disk V2 is rotated clockwise.
The cartridge 10 is then rotated clockwise relative to the base.
If using the RLT430CES curved shaft line trimmer attachment, the knob should be rotated clockwise.
This entails that the arm initially will be rotated clockwise around the axle journal 8.
The arm is then rotated clockwise until the pivot pin 6 is received in the hole 19.
The levers L2 of these switches has therefore rotated clockwise through an angle a.
Scraper 13 is rotated clockwise on substrate 2 in synchronization with the disc 4 by reduction gears 6.
When the pusher plate (I) is rotated clockwise.
The gear 294 is rotated clockwise and anticlockwise with the input shaft 2.
As a result, the cam 10 is urged to be rotated clockwise.
When cover 43 is rotated clockwise as seen in Figs.
The head 21 of each bolt 20 is engaged by a screwdriver and rotated clockwise.
The rotating drum 310 may be rotated clockwise or counter-clockwise.
In operation, pick-up roller 78 is rotated counter-clockwise and the transfer roller 82 is rotated clockwise.
The support arm 22 is thereby rotated clockwise around the axle 24.
Next as illustrated in Figure 5C, the handwheel 78 is rotated clockwise.
Similarly, the line 22 has been rotated clockwise with respect to the line 20.
In a third state, the lock member 435 has been rotated clockwise to a third position.
The photoconductor 41Y is rotated clockwise in FIG . 3 by a drive motor.
In Figures 1A to 1 D, the lamella axes 4 are rotated clockwise in the figures.
In FIG . 2, the photoconductor drum 1Y is rotated clockwise by a driving motor ( not shown ).
Or the left-hand lever is pivoted, crown 12 can then be rotated clockwise or anticlockwise, respectively.
You'll also be interested in:
Examples of using Clockwise
Show more
Turn the battery clockwise to lock it in place
Clockwise rotation increases the volume level
Turn the control clockwise to increase gain
Examples of using Rotated
Show more
The horn can be rotated in its turn
Is rotated so the blade is at the maximum height
The handle can be rotated to several angles
