Examples of 'rotating speed' in a sentence
Meaning of "rotating speed"
Rotating speed refers to the speed at which an object or system rotates. It is commonly used in various fields such as engineering, mechanics, and physics to measure the speed of rotating machinery or moving parts
How to use "rotating speed" in a sentence
Basic
Advanced
rotating speed
The rotating speed in rotations per minute.
Viscosity affects maximum possible rotating speed.
The slow rotating speed allows you to.
Press the button to select the rotating speed.
The rotating speed n is described in revolutions per minute.
It all depends on the rotating speed of this planet.
Mixing is thorough but it depends on the rotating speed.
The rotating speed can be changed by turning the speed.
The fan is started up with medium rotating speed.
Set the drill rotating speed to the recommended speed.
Increase in torque transmitted with relative rotating speed.
Increases in rotating speed have provided the largest variation.
Roaster temperature and kiln rotating speed were varied.
Any rotating speed which results in high vibration amplitudes.
Check of the rotating speed.
See also
The rotating speed sensor detects engine rotating speeds.
Free adjustment of impeller rotating speed and cleaning times.
The rotating speed of the roller can be adjusted during operation.
Drag the scroll bar to adjust rotating speed of the dome.
Rotating speed of.
The temperature and rotating speed can be controlled and adjusted.
Varying pressure applied to the sander will affect its rotating speed.
Critical rotating speed of a mill.
This time is controlled by adjusting the rotating speed of the screw.
Information about the rotating speed of the rotor is being sent to the VarioStress.
It can be used for bearing under moderate load and rotating speed.
Operator can control the rotating speed depending on different jobsite.
The rotating speed of the stem portion and the pressure are adjustable.
Bearing dimensions and rotating speed must be taken into account.
The rotor vibrations are due to rotating imbalance at a given constant rotating speed.
W is the instantaneous rotating speed transmitted to the drilling assembly by the engine.
Of particular interest are the harmonics related to the rotating speed of the machine.
Pad rotating speed per minute in random orbit with forced rotation mode.
Fast working knives and a high rotating speed enables a high working speed.
A higher rotating speed with a lower addition rate will incorporate more air.
Different pressure on the trigger results in variable rotating speed of the power head.
Determination of the rotating speed is achieved by means of parameters fluctuating upstream and downstream.
Optimum performance of the compressor is strongly influenced by the rotating speed of the compressor.
The rotating speed and the torque measurement are achieved on the shaft of the rotor.
Do not start cutting operation until the bit has reached full rotating speed.
Rotating speed selection Position of the shift knob.
Planetary food mixer can not achieve high rotating speed under heavy loads.
Rotating speed of the CTM in revolutions per minute.
The polishing operation requires a balance between the rotating speed and the applied pressure.
The selected rotating speed will be indicated by the corresponding LED.
It is assumed that the blower motor rotates at a rotating speed RP.
This routine is repeated until rotating speed RS equals the initial rotating speed.
The rotating speed and the torque are measured by means of measuring devices N and torquemeter C.
Seal can be applied at higher pressure and rotating speed than specified by DIN.
Clutch Dial Rotating speed selection Position of the shift knob.
You'll also be interested in:
Examples of using Rotating
Show more
The disc is rotating but no picture is produced
Grab or touch a moving cable or a rotating drum
Rotating blades can cause serious injury
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
