Examples of 'rotation control' in a sentence
Meaning of "rotation control"
a feature or function that allows you to control the rotation or movement of something
How to use "rotation control" in a sentence
Basic
Advanced
rotation control
Forward and reverse rotation control lever.
Rotation control of the gallow through the rotation angle.
This provides very precise rotation control.
Rotation control selector switch for the peristaltic pump.
Working machine including a rotation control device.
The rotation control means is not illustrated in this figure.
Increased torque and rotation control during finishing.
Its operation is similar to that of the rotation control.
Rotation control difficult.
Check the operation of the blade rotation control.
The chute rotation control is located on the back of the snow thrower.
When you move the blade rotation control.
The rotation control means may be the same as the foregoing embodiment.
It is equipped with an agitation motor with automatic rotation control.
The rotation control button can be used to stop the scan mode.
See also
Find the unique beauty created by separate roll rotation control.
The handle assembly includes a rotation control member and an articulation lever.
The motor is preferably an electric motor with electronic rotation control.
Use the blade rotation control to start and stop the rotation of the blade.
This results in a catheter with superior rotation control and responses.
Move the blade rotation control to the DISENGAGE position.
Mow for a short distance and again check the operation of the blade rotation control.
The procedure when the forced rotation control is executed will be described in detail below.
Remove the hex lock nut and machine screw from the chute rotation control.
Move the blade rotation control to the ENGAGE position.
If you liked the application collaborate with the development Buy Rotation Control Pro.
Make sure the blade rotation control is in the DISENGAGE position.
In particular, this allows to provide a unique rotation control.
The rotation control element could be the rack shown in FIGS.
To prevent an injury, the blade rotation control must operate correctly.
Rotation control over the first restricting component 51c is performed as follows.
Move the blade rotation control to the DIS.
The rotation control in the second brushless motor 12 will now be described in detail.
In normal usage, the blade rotation control will not require an adjustment.
For the fan head to rotate, push the automatic rotation control down.
The present rotation control module 3 is therefore safer.
During this period of time, the forced rotation control may be executed.
In addition, the rotation control means is integral with the restricting component.
To stop the rotation of the fan head, pull the automatic rotation control up.
Fortunately, the rotation control information can be specified using relatively little memory.
To lock the switch trigger, place the rotation control in the center position.
Rotation control is also possible with this location Fig 4.
A controller of a rotary electric machine performing rotation control of the rotary electric machine, comprising,.
The rotation control means comprise, for example, a motor and a gear.
Accordingly, there is a problem in that the rotation control easily becomes unstable in such cases.
The rotation control module comprises a spindle 4 for operating the switch 1.
To lock the switch trigger, place the direction of rotation control in the center position.
In fig . 6 the rotation control of the louver boards is illustrated.
Advantageously, the filter furthermore comprises rotation control means for the second element.
Thus, only one rotation control is needed in order to operate the member 3.
You'll also be interested in:
Examples of using Rotation
Show more
In left rotation the safety clutch is deactivated
I would estimate a half rotation before it is over
Its rotation is guided by the drive shaft
