Examples of 'rotation speed' in a sentence
Meaning of "rotation speed"
rotation speed - Refers to the rate at which an object or system rotates or spins, usually measured in units such as revolutions per minute (RPM) or radians per second (rad/s). It describes the velocity or frequency of the object's rotation
How to use "rotation speed" in a sentence
Basic
Advanced
rotation speed
Header rotation speed and operating hours.
Press or to increase or decrease the rotation speed.
Rotation speed adjustable via rotary control.
Consequently the rotation speed suddenly increases.
Turn to adjust the platter rotation speed.
Bit rotation speed as a function of hole diameter.
Magnetic stirring element rotation speed setting.
The rotation speed plays a major role.
Strong vibrations or the rotation speed is reduced.
The rotation speed is controlled with a potentiometer.
Run well under high rotation speed.
N is the rotation speed of the fan in rpm p.
To work at the correct rotation speed and.
This rotation speed ratio m may be different.
Current in the cutting head or rotation speed.
See also
The rotation speed of the anilox cylinder.
This detection applies to an angular rotation speed.
The rotation speed of the steering wheel.
It is also recommended to use a slow rotation speed.
The rotation speed of the paddles is constant.
Frequency converter and rotation speed sensor option.
Rotation speed of the cooling fan.
Display the rotation speed of the motor.
Rotation speed of the rotating electrode.
The gobo wheel rotation speed can be adjusted.
Give me a second to calculate rotation speed.
Decrease rotation speed or scan length.
Control and regulation of the rollers rotation speed.
Increase rotation speed or scan length.
How to select tightening power and rotation speed.
The rotation speed is printed on the record label.
By just obtaining the rotation speed of that star.
The rotation speed is readjusted synchronously as an active rotation.
Upon overloading the rotation speed decreases drastically.
This function runs with maximum rotation speed.
Recommended rotation speed for recharging.
The fan works on the highest rotation speed.
You can change rotation speed during operation.
The fan works on the lowest rotation speed.
This rotation speed is the highest in the equator.
Ensure that the rotation speed.
High rotation speed shortens the grinding time.
Frequency converter control requires rotation speed sensor.
The rotation speed is kept constant.
It is important to reach a high rotation speed.
High rotation speed and minimum core deviation.
Which is proportional to the rotation speed.
High rotation speed of the rotary oil separator.
The key factor is rotation speed.
Spin rotation speed of the rings.
You'll also be interested in:
Examples of using Rotation
Show more
In left rotation the safety clutch is deactivated
I would estimate a half rotation before it is over
Its rotation is guided by the drive shaft
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
