Examples of 'rotational frequency' in a sentence
Meaning of "rotational frequency"
rotational frequency ~ This phrase describes the rate or speed at which an object or system rotates or revolves around an axis. It is a common term used in physics and engineering to quantify the number of rotations or cycles per unit of time
How to use "rotational frequency" in a sentence
Basic
Advanced
rotational frequency
Maximum rotational frequency of the spindle for blade.
It is therefore difficult to set a low idling rotational frequency.
Maximum rotational frequency of the spindle for cutting head.
The second threshold is higher than the idling rotational frequency.
Rotational frequency factor and the current rotational frequency.
The rotation speed is herein defined as rotational frequency per unit time.
Rotational frequency shaft.
The gravitational wave then has a frequency twice the rotational frequency.
The difference in rotational frequency is described by the slip of the generator.
This external frequency is greater than the maximum rotational frequency of the rotor.
The rotational frequency of both depends on the current load on the filter.
One of the tones comes from the rotational frequency of one of the gears.
Tip speed is thus a function of the rotor diameter and the rotational frequency.
Avoid resonances with rotational frequency and double mains frequency as a result of.
The platform modulates the sum of opposing acceleration signals with a frequency twice its rotational frequency.
See also
Rotational frequency rpm Punch.
Further, a relatively low idling rotational frequency can be set.
As the rotational frequency increases, the roller bearing becomes limited in load carrying capacity.
Producing a signal representative of the rotational frequency of said eccentrically mounted member ;.
When cutting with an end mill, cutting is generally performed at a constant rotational frequency.
DcMax is the maximum rotational frequency in Hz ;.
Preferably, the first threshold is equal to or less than the idling rotational frequency.
Figure 5 is a graph of a rotational frequency of magnetic brush vs. charging fog.
Frequency channel - Define the channel of frequency used for determination of rotational frequency.
At every instant, the equipment has just one rotational frequency ( or radial speed of rotation ).
This way, the rotational frequency of the indoor fan 21 is reduced to the rotational frequency c1.
The rotation detector 81 acquires an engine rotational frequency.
The rotational frequency of these antennae is 30 Hz.
In response, the compressor 11 is driven at the maximum rotational frequency.
Rotational frequency Warm-air heating operation mode ( Auto blowing air quantity ).
Fig . 6 is a view showing a relationship between engine rotational frequency and dynamo output ;.
A rotational frequency of around 0.2 to 1Hz is a suitable range.
The test was conducted at a paddle rotational frequency of 200 rpm.
The rotational frequency sensor 87 is a pickup coil, for example.
In the present case, imbalance signal u ( t ) has the rotational frequency of shaft 30.
Where is the rotational frequency of the driven tyre, s-1.
The indoor fan controller 52 controls the rotational frequency of the indoor fan 21.
Rotational frequency R2 is a rotational frequency of the engine 15 at point M2.
For the beginning of the spooling process a rotational frequency of about 106 min-1 results from this.
You'll also be interested in:
Examples of using Frequency
Show more
Adjusts the higher frequency of the sound
The frequency of armed conflicts is on a downward trend
The desired station frequency is not tuned in
Examples of using Rotational
Show more
Rotational arrangements for new permanent seats
Soya is a good rotational crop for maize
Rotational molding excels at producing hollow parts
