Examples of 'rotor shaft' in a sentence
Meaning of "rotor shaft"
refers to the central shaft or spindle that rotates in a rotor system, typically found in machinery or vehicles
How to use "rotor shaft" in a sentence
Basic
Advanced
rotor shaft
Wind turbine rotor shaft support structure.
Secure the blade on the rotor shaft.
Rotor shaft of synchronous electric machine.
The rotor arrangement is attached to a rotor shaft.
Preparing the tail rotor shaft bevel gears.
The bearings primary function is to support a rotor shaft.
On one end of the rotor shaft of the synchronous.
The figure shows disassembly of the main rotor shaft.
Remove the main rotor shaft first see top.
The turbine and compressor are mounted on the rotor shaft.
Low speed rotor shaft.
The moving blades are fixed directly on the rotor shaft.
At least a portion of the rotor shaft extends in an axial direction.
The encoder is conventionally a discate member mountable on a rotor shaft.
High speed rotor shaft.
See also
The encoder is conveniently a discate member mountable on a rotor shaft.
Rotor shaft thrust.
Securing the tail rotor shaft.
The common rotor shaft is axially journalled in the compressor part.
Completing the main rotor shaft.
Then push the rotor shaft into the mechanics from above.
A control knob is coupled to an outer end of the rotor shaft.
They are thus fixed to the rotor shaft by means of complementary shapes.
The magnetic circuit may comprise a sleeve surrounding a rotor shaft.
The nut is fixed to the rotor shaft by performing screw fastening.
The device makes it possible to inspect the bores of a rotor shaft.
Rotor and rotor shaft here then denote the same piece.
The transmission of the torque of the rotor shaft to the blades.
The rotor shaft is held within cylindrical flanges of the casing by bearing.
The latter is utilized to produce radial forces on the rotor shaft.
Assembly method for a main rotor shaft and an installation tool thereto.
The rotor hub may be driveably connected to the rotor shaft.
The rotor may include a rotor shaft driveably connected to a power source.
Increasing a tightness of a shrink fit is likely to incur curving of the rotor shaft.
Tap the rotor shaft from the pulley side using a soft hammer.
It includes an impeller of vaned disc type mounted on the bottom of a rotor shaft.
The rotor shaft must not have any vertical play in the mechanics.
Thus the need for a speed sensor on the rotor shaft is eliminated.
The rotor shaft is guided by gas bearings because of the high speed of rotation.
Pull both blades off the rotor shaft and swap them over.
The rotor shaft may preferably form an integral part of the output shaft.
Being a gear ratio between the rotor shaft and the electric machine shaft.
Rotor shaft made in quartz that extends the life utility of the pump.
The fan is mounted upon the rotor shaft inside the motor housing.
Slip ring assembly is pressed on to the rear end of the rotor shaft and.
The rotatable part can be the rotor shaft or can be the driving wheel.
This provides a more stable tool during the rotation of the rotor shaft.
The fan blades may be secured to the rotor shaft for rotation therewith.
The rotor hub conductor may be electrically isolated from the rotor shaft.
The mechanical backstop attached to the rotor shaft can be used for ascending conveyors.
You'll also be interested in:
Examples of using Rotor
Show more
The rotor is blocked or the differential pressure
Set the tail rotor trim to centre
The rotor blades are made of laminated rubber
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
