Examples of 'roughness may' in a sentence
Meaning of "roughness may"
Roughness may: 'Roughness may' implies that a certain degree of rough texture, unevenness, or difficulty is possible or likely in a particular situation. It suggests that there is a chance or potential for roughness to be present, either physically or metaphorically
How to use "roughness may" in a sentence
Basic
Advanced
roughness may
Any roughness may be ground smooth.
This interface is then positioned very precisely and its roughness may be lower.
Mean surface roughness may be defined in different manners.
A typical polyester or polypropylene fibre that comes with different surface roughness may be a preferred fibre.
The surface roughness may be provided in any suitable manner.
And, in still further examples, the surface roughness may be 1 micron or less.
The roughness may be visible to the naked eye or microscopic.
The surface with asymmetric roughness may have a saw tooth type profile.
Roughness may be due to incomplete burning of fuel in one or more cylinders.
The limiting figures for average surface roughness may form a special agreement between the parties.
This roughness may be imparted to the inner surface during extrusion.
For example, pegs, dimples, bristles and surface roughness may all be used.
Surface roughness may be measured using a laser profilometer or other standard instrumentation.
In a particular example, the surface roughness may be not greater than about 500 nanometers.
Roughness may be also measured by comparing the surface of the workpiece to a known sample.
See also
As a variant, roughness may also be involved.
Such roughness may for instance be obtained with a sanded matrix or a sanded punch.
Surface porosity or roughness may be so high that PT can not be used.
The roughness may have any profile ; thoseconsidered here are either periodic or pseudo-random.
Note that the coating roughness may be optimized later to reduce the corrosion initiation.
The surface roughness may be achieved by the roughening procedure as previously described.
Furthermore, a surface roughness may be created on all of the walls of the sipes.
The roughness may be provided by protrusions ( 24 ) on the surface.
A slight redness and / or roughness may transiently occur after a double dose vaccination.
The average roughness may be calculated in accordance with the same definition.
Thus, an implant surface roughness may also be obtained by providing a thicker oxide layer.
The surface roughness may be achieved as a result of the plasma spraying process.
In severe cases the surface roughness may be relatively low even after a 5 second photocure interval.
This surface roughness may also serve to enhance the ultrasound visibility of the coated devices.
The preferable roughness may be comprised between half a micron and five microns.
This roughness may be obtained by a TMAH bath.
However, too pronounced a roughness may be detrimental, by promoting the incrustation and accumulation of dirt.
The surface roughness may be further described by the parameters Ra, Rz and Rmax.
A surface roughness may be provided by, for example, plasma spraying, blasting or etching.
For example, roughness may be measured using contact or non-contact methods.
The surface roughness may be measured by any suitable technique, including Atomic Force Microscopy ( AFM ).
The surface roughness may be measured in accordance with ISO 3783.
You'll also be interested in:
Examples of using Roughness
Show more
And the roughness shows no sign of stopping
Humanity had to learn about measuring roughness
Decide surface roughness depending on the application
Examples of using May
Show more
I may decide to teach you something tomorrow
Of these uses oratory may serve as an illustration
This may be helpful if network problems occur
