Examples of 'route the cable' in a sentence
Meaning of "route the cable"
To route the cable means to determine or plan a path or course for a cable to be installed or connected. This phrase is commonly used in the context of setting up electrical or communication systems, where cables need to be routed or directed to specific locations or devices
How to use "route the cable" in a sentence
Basic
Advanced
route the cable
Route the cable under the bolt.
B Align the microphone unit with the bracket and route the cable through the notch in.
Route the cable to the outside.
Install the flange mount or shock mount, and route the cable.
Do not route the cable under furniture or appliances.
Route the cable back to the mains supply.
How do I route the cable through it?
Route the cable away from sources of electronic interference.
Do not route the cable with the mains supply cable.
Route the cable so it does not interfere with vehicle operation.
Do not route the cable along a folding cable management arm.
Route the cable forward through the vehicle while.
Do not route the cable too long or connect it to a noisy device.
Route the cable antenna of the device to the rear.
You can route the cable outside of the pole or through the pole.
See also
Route the cable through the guide hose adapter.
Always route the cable towards the back away from the device.
Route the cable through the pole and connect it.
Can we route the cable out radially rather than axially?
Route the cable so that nobody can trip over it.
Route the cable through the hole in the side lid.
Route the cable through the fixed part of the arm.
Route the cable into the passenger compartment of your vehicle.
Route the cable so that it can not be trapped or damaged in any way.
Route the cable in such a way that it can not be crushed or damaged.
Route the cable for the remote and connect to the amplifier.
Route the cable under the cross bar portion of lower handle.
Route the cable through the hole and connect to the remote.
Route the cable into the channel to avoid crimping the cable.
Route the cable through the pole and connect it to the antenna.
Route the cable safely so that there is no risk of anyone tripping over it.
Route the cable through the hole and attach the cable gasket to the hole.
Route the cable forward through the vehicle while taping to the body electrical harness.
Route the cable through the hole and attach the cable gland to the hole.
Route the cable through an available knockout and make the proper connection as shown below.
Route the cable outside the ferrite core once and then close the ferrite core.
Route the cable for the remote and connect to both the remote and amplifed subwoofer.
A Route the cable through the hole.
A Route the cable through the hole in the ceiling.
Route the cable through the pole-mount adapter.
Route the cable so it does not overhang, and can not be tripped over or.
Do not route the cable through the stem or any other mounts or cable stops!
Route the cable through the housing, then through the derailleur and clamp groove.
Route the cable round the outer brass rods, then into the cable guides.
Route the cable and secure it with the supplied cable clamps Accessory 5.
Route the cable as desired to the location of the Home 3G.
Route the cable through the wall, or through the punch-out in the cover.
You'll also be interested in:
Examples of using Cable
Show more
Secure the coaxial cable to the ceiling
A cable tie is provided with the appliance
Use plenum rated cable where it is required
