Examples of 'rubber backing' in a sentence
Meaning of "rubber backing"
Rubber backing refers to a layer of rubber material that is applied to the backside of various items such as rugs, mats, or carpet tiles. This layer provides additional support, prevents slipping or sliding, and enhances durability and stability of the item
How to use "rubber backing" in a sentence
Basic
Advanced
rubber backing
The rubber backing pad is available as an option.
The article has a cellular rubber backing.
Place the rubber backing pad onto the.
Mounting and removing the rubber backing.
The rubber backing pad is available as an optional accessory.
Regular mat with solid rubber backing.
Mount the rubber backing pad onto the spindle.
Even the ones with the rubber backing.
Cover the rubber backing pad with the bonnet.
Place the sanding sheet on the rubber backing pad.
Rubber backing provides durability and helps to reduce movement.
Sanding requires a special rubber backing pad available as an option.
The rubber backing helps prevent the rug from sliding.
Place the sanding disc on the rubber backing pad.
Place the rubber backing pad onto the spindle shaft.
See also
It is then adhered during slab cure to a nitrile rubber backing sheet.
The rubber backing layer may be vulcanised to the second fabric layer.
Typically the carpeted material is attached to a rubber backing layer by any of various methods.
Turn rubber backing pad 2 counter-clockwise until it snaps into place.
Use the tool without the guard only when sanding with the rubber backing pad.
The roll coater had an upper rubber backing roll and a lower gravure coating roll.
It's all about the perforated rubber backing.
Carpet2 without rubber backing or carpet padding.
Before fitting new sanding sheets, remove any dust and dirt from rubber backing pad 2.
To remove the rubber backing pad, loosen the threaded.
The single pile fabric layer is bonded directly to the rubber backing layer 20 by vulcanization.
Turn rubber backing pad - 2 by one half-turn to the next engaging position.
Changing the brake of the rubber backing pad / brake ring.
Fit the rubber backing pad 13 and flexible grinding disc onto the spindle 6.
Prior medication-applying patches that employed a rubber backing allow virtually no moisture evaporation from the skin.
Figure 6A shows how to attach an abrasive disc with a rubber backing pad.
The gravure rolls and the rubber backing rolls were the same as described in Example 1.
Ring on the threaded clamp nut 14 must face towards the rubber backing pad.
To remove the rubber backing pad, loosen the threaded clamp nut ( 14 ) wih the two-pin spanner.
The sample referred to as " Rubber " is a solid vulcanised rubber backing of a conventional floor mat.
Place the sanding disc ( O ) on the rubber backing pad N.
Unscrew fastening screw - 14 from rubber backing pad with Allen key 8.
You'll also be interested in:
Examples of using Backing
Show more
Tighten the backing pad suffi ciently
Backing plate has obvious traces of corrosion
Advertisers are backing out as they prefer digital
Examples of using Rubber
Show more
The rubber may be damaged if a tool is used
I used to keep a big rubber band in my pocket
A rubber wheel ensures the trolley motion
