Examples of 'rubber grommet' in a sentence
Meaning of "rubber grommet"
rubber grommet: A 'rubber grommet' is a small, flexible ring or liner, typically made of rubber or rubber-like material, used to protect, cover, or strengthen an opening in a surface and to provide cushioning or insulation
How to use "rubber grommet" in a sentence
Basic
Advanced
rubber grommet
Replace rubber grommet and control knob.
Cable entry through a rubber grommet.
Remove the rubber grommet from the bottom panel.
Dish soap can be used to lubricate the rubber grommet.
Feed cables through rubber grommet at switch bottom.
Cable entry for electric supply connection with rubber grommet.
Insert the black rubber grommet into the duct hole.
Slide the spray wand storage hook through the hole in the rubber grommet.
Remove red rubber grommet with brass bushing or black rubber.
In between is a rubber grommet.
Cut out the rubber grommet on top of the unit, and remove the stop.
The knob rests on a valve stem with a rubber grommet at the base.
Is the EPDM rubber grommet made by your factory?
Insert the short leg of the hex key through the rubber grommet as shown.
Protect the cables with rubber grommet if you route the cables through holes.
See also
The barbed fitting may be easily pulled out of the rubber grommet at the unit.
Wiring harness rubber grommet supplier Fusterubber. com.
If no hole exists, use a circle cutter to drill the firewall, then install a rubber grommet.
Gently turn and pull the rubber grommet of the motor shaft.
The tilting operation liberates at least one hole 2 otherwise sealed by the rubber grommet.
Insert the O-ring rubber grommet into the vehicle body.
Insert the 4 ” inlet pipe through the rubber grommet.
Silicone rubber grommet manufacturer Fusterubber. com.
Drill a 14 mm hole into the vehicle body . Insert the O-ring rubber grommet into the vehicle body.
EPDM rubber grommet for cars supplier Fusterubber. com.
Before placing the water heater, insert contrac - tion tube ( part 1 ) and rubber grommet part 2.
Insert the rubber grommet ( d ) supplied it extends about 4 cm downwards.
There is also a rubber grommet 42 fitted under the lock nut for sealing purposes.
Push the rubber grommet ( A ) onto the end of the dowel pin as shown.
Push the rubber grommet ( A ) onto the end of the dowel rod as shown.
Push the rubber grommet ( I ) onto the end of the dowel rod as shown.
Remove rubber grommet ( A ) from the end of the dowel pin B.
Remove the rubber grommet ( 5 ) from the end of.
The threadless rubber grommet can be connected to a 3/4 ” pipe or garden hose.
Push the rubber grommet ( 5 ) onto the end of the dowel pin.
Insert the O-ring rubber grommet into the 6 Drill a 14mm hole into the vehicle body.
You'll also be interested in:
Examples of using Rubber
Show more
The rubber may be damaged if a tool is used
I used to keep a big rubber band in my pocket
A rubber wheel ensures the trolley motion
Examples of using Grommet
Show more
The microphone grommet must be installed when
Grommet was a lot happier after his checkover
Replace rubber grommet and control knob
