Examples of 'rubber mold' in a sentence
Meaning of "rubber mold"
rubber mold - Refers to a hollow form that is used to give shape to molten or hot liquid material such as rubber, plastic, metal, etc
How to use "rubber mold" in a sentence
Basic
Advanced
rubber mold
Such granules may be filled in a rubber mold.
The rubber mold was produced as follows.
Improvement is difficult even by improving the rubber mold.
The silicone rubber mold was placed on this layer.
The wax model is removed from the rubber mold.
The rubber mold is then used to make an epoxy galvano.
Such rubber is hereinafter simply referrred to as the rubber mold.
The rubber mold must be a continuous body or continuously connected sections.
The hard candy portion is then placed into a rubber mold.
A rubber mold was fabricated in the desired outer shape of the tube.
A green compact can therefore be removd from the rubber mold.
Silicone rubber mold and silicone rubber Keypad.
The other pour is for the stone base made from a rubber mold.
Die manufacturing Rubber mold Transfer molding die.
The mix of example II was then poured into the rubber mold to fill it.
See also
Die manufacturing Rubber mold Compression molding die.
Following polymerization of the monomer, the rubber mold is removed.
A rubber mold may be placed in a gas-tight chamber and exposed to vacuum in this chamber.
Each of the sample napkins was suspended across a rubber mold which simulates the female form.
A portion of the rotary die 2a therefore constitutes the bottom of the rubber mold.
Such rubber mold therefore can not be utilized for the wet die-pressing.
In this case, the cover is included in the rubber mold herein.
The rubber mold is filled with the dispersion to a height of 0.5 mm.
The specimen was then removed from the solution, and placed in a rubber mold.
A portion of the solution was poured into a silicone rubber mold having a rectangular depression 2 mm deep.
Once the gelatin has dissolved, the dispersion is poured into the rubber mold.
Subsequently, the rubber mold was placed in a die-press machine.
Once the agarose has dissolved, the dispersion is poured into the rubber mold.
Subsequently, the rubber mold was located in a die-press machine.
In addition, a thin rubber film may cover the inner surface of the rubber mold.
In this embodiment, a rubber mold 10i consists of a cylindrical body without a bottom.
The compacting described above may hereinafter be referred to as the rubber mold die-pressing.
In about 24 hours, the rubber mold can be removed from the original model.
After accurately weighing the powder, it is fed from the container into a rubber mold.
The rubber mold may be made from silicone, polysulfide, or polyether-based rubbers.
The liquid rubber silicone is poured into a room temperature vulcanization ( RTV ) rubber mold.
Rubber mold clamps plastic molding injection - Mjptv . com.
When the load from a punch ( es ) is relieved, a rubber mold restores its shape.
Rapid Rubber Mold Service - manufacturer, factory, supplier from China.
Referring to Fig . 57, the pressure applied to the outer surface of a rubber mold is reduced.
In addition, the rubber mold 10 may be damaged.
Fig . 43 illustrates the dimensions of a rubber mold.
Fig . 54 is a drawing of a rubber mold for forming a screw.
Fig . 59 illustrates a method for producing a rubber mold.
Fig . 36 illustrates an embodiment of a rubber mold used in the wet die-pressing.
The cover and bottom of the rubber mold are denoted by 12 and 10k, respectively.
The resulting fiber-binder mixture was poured into the rubber mold which had been heated to 40°C.
A cover 10h is tightly fitted on the rubber mold 10 in the inert gas atmosphere.
The cylinder 71 is then lowered to position the rubber mold 10 into the die 2.
Fig . 45 illustrates the rubber mold used in the Examples.
You'll also be interested in:
Examples of using Rubber
Show more
The rubber may be damaged if a tool is used
I used to keep a big rubber band in my pocket
A rubber wheel ensures the trolley motion
Examples of using Mold
Show more
They broke the mold on that one
Mold requires high humidity levels to grow
No one wants a mold of their own penis
