Examples of 'rubber plug' in a sentence
Meaning of "rubber plug"
A rubber plug refers to a small, cylindrical piece made of rubber that is used to seal or close an opening. It is usually inserted into a hole or pipe to prevent the leakage of liquid or gas
How to use "rubber plug" in a sentence
Basic
Advanced
rubber plug
A rubber plug for a medical vial container.
Service drain outlet with rubber plug.
Push the rubber plug firmly into place.
Securely insert both the rubber plug and drain.
The rubber plug is located on the outer bottom.
Then he swapped the rubber plug in the tub.
Rubber plug is located outer bottom.
Each whale has a rubber plug in the base.
Rubber plug for window holder.
Close the access hole with the rubber plug.
Rubber plug for structural integrity.
The upper branch tube is occluded by the rubber plug.
The rubber plug can be reused many times.
The distal end of the tube is covered by a rubber plug.
Insert the rubber plug into the bottom hole.
See also
There was a small but steady leak with this rubber plug.
Push the rubber plug over the mounting bolt.
The number of tests was set to ten for each rubber plug.
Rubber plug where cam angle sensor would mount.
Radial electrolytic capacitors use a rubber plug with a very dense structure.
It has a rubber plug if you keep everything on the inside.
Remove the drain knob and rubber plug and retain for.
Remove the rubber plug from bottom of the docking station.
The lock consisted of a tapered pin and a rubber plug serving as a keeper.
Pull the rubber plug out in the direction of the arrow.
Drain all water and reinstall rubber plug and retighten the nut.
Keep the rubber plug inserted when this input is not in use.
When using the security key to be removed on the rubber plug mover engine.
Remove the rubber plug temporarily and plug in the charger.
Protect the capillary tube in the ventilation duct opening with the rubber plug supplied.
Remove the rubber plug in order to seal the cable exit.
Cover the connector opening on the microphone base with the supplied round rubber plug.
Remove the rubber plug and keep it for later use.
The sealing member further comprises a seal plate for guiding the needle through the rubber plug.
Close the rubber plug and wipe off any water spills.
About the rubber brushes, gasket and rubber plug.
Replace the rubber plug and tighten the drain knob firmly.
Remove the bayonet catch and the rubber plug 2.
Insert the supplied round rubber plug in the unused cable exit hole.
A rubber plug is half driven in, and nitrogen displacement is performed.
Never attempt to remove the rubber plug located at the bottom of the fuel cell.
When the container is almost full, replace the rubber plug.
Remove the rubber plug and fill the water tank directly from tap.
Remove the cap, then the rubber plug from the spout.
Remove the rubber plug from the drain tube and let the water run out.
Remove the drain cap and the rubber plug from the drain outlet.
The rubber plug practically fell out with just a touch!
Remove the cap and the rubber plug and drain the water tank.
Located on the backside of the transmitter, the charging receptacle is covered by a rubber plug.
Remove the drain knob & rubber plug from the drain hole.
You'll also be interested in:
Examples of using Plug
Show more
Plug the machine into a suitable outlet
Put the small plug in the appliance
Plug the charger into proper outlet
Examples of using Rubber
Show more
The rubber may be damaged if a tool is used
I used to keep a big rubber band in my pocket
A rubber wheel ensures the trolley motion
