Examples of 'rubber washer' in a sentence
Meaning of "rubber washer"
A rubber washer refers to a flat, round piece made of rubber that is used in various applications to create a seal or cushion between two surfaces. It is commonly used in plumbing fixtures and industrial machinery to prevent leaks and provide insulation
How to use "rubber washer" in a sentence
Basic
Advanced
rubber washer
Be sure rubber washer is properly seated in fitting.
Supply and inspect for rubber washer.
Ensure the rubber washer on the screw is free of wear.
Even has the original rubber washer.
Please put rubber washer on the coupler to avoid any leaks.
Man playing with a rubber washer.
Check that the rubber washer is installed in the inlet hose.
Leaking faucets are generally a result of a worn rubber washer.
Ensure there is a rubber washer in the hoses.
The absorber is tuned by adjusting the compression of the rubber washer.
Most taps drip because a rubber washer needs replacing.
The hard rubber washer is bonded to the elastomeric body of the seal.
Jack replaced a rubber washer.
Remove old rubber washer from inlet hose and replace with.
Be sure the garden hose end has a rubber washer to minimize.
See also
Slide the rubber washer over the faucet tubing and hose.
Inside each end you can see there is a rubber washer.
Then insert the rubber washer into the hose nut.
Adjust the position of the Exo Terra Light Dome by moving the remaining rubber washer.
Install glass bowl using rubber washer and nut provided.
And rubber washer to the base plate of the outdoor unit see fig.
Verify intake tube is inserted in the rubber washer in the intake tube.
Make sure the rubber washer is properly inserted into the coupler.
The standard metal valve has as a soft rubber washer at its base.
Replace the rubber washer located at the end that goes to the tube.
Integral pumps have a hole in the side with a rubber washer that fits round the valve.
The rubber washer is dimensioned to be positioned against the front face of the slide.
NPT fittings with the rubber washer on the outside of the hous.
Remove finial, hex nut and rubber washer.
Ensure the supplied rubber washer is fitted inside the coupling.
Install the centre pin, spring and rubber washer.
Failure to properly install rubber washer could result in water leakage or loss of performance.
The secondary container should be fluid-tight, preferably with a screw cap and a rubber washer.
Install the rubber washer and the plastic nut on the threaded end of the cell.
Internal threads - Keep the rubber washer in place.
Reinstall the rubber washer into the hose fitting if it has fallen out during shipment.
Two days ago, Jack replaced a rubber washer.
Make sure the rubber washer is firmly pushed against the tap to prevent water leakage.
The stopper 7 consists of a simple rubber washer as shown in fig . 4.
Remove old rubber washer from inlet hose and replace with new rubber washer.
Remove finial nut, glass support nut, and rubber washer from threaded post on socket plate.
Place the rubber washer inside the tap connector and screw onto the water tap.
Remove the finial, hex nut and rubber washer from the threaded nipple.
Install rubber washer provided with hose. connection with valve.
External threads - Remove the rubber washer before threading the.
Note the raising of the shutter speed dial, thanks to a ( luckily! ) perfectly adapted rubber washer.
Check the rubber washer on the LPG canister is intact.
Refer to the step 24 in getting the rubber washer and hex nut.
Remove the first rubber washer and slide the ring of the fixture 's.
This kit includes replacement o-rings, rubber washer and water inlet filter.
You'll also be interested in:
Examples of using Rubber
Show more
The rubber may be damaged if a tool is used
I used to keep a big rubber band in my pocket
A rubber wheel ensures the trolley motion
Examples of using Washer
Show more
Insert washer and thread nut to screw
The following is a guide to using your washer
This pressure washer is designed for cold
