Examples of 'run position' in a sentence
Meaning of "run position"
run position: Refers to the location or status of someone or something in a race, competition, or organization. It signifies the rank or role held by an individual or entity
How to use "run position" in a sentence
Basic
Advanced
run position
In the run position the electrical system is active.
Move choke lever to run position.
I will run position one.
Move engine speed control to the run position.
Must be in Run position to start manually.
Control knob to the run position.
Normal run position F - engine runs or can fire.
Second turn of start my already attack run position.
N Choke knob automatically returns to the run position F when the throttle trigger is operated.
Twist the button to release it to the ready to run position.
Also, the circuit breaker has a run position and a test position.
When is released the machine will continue in previously selected forward run position.
Normal run position F - engine runs or is ready to start.
Make sure the chain brake is in the run position by.
Fast Run position Plus ; positive polarity.
See also
Put the throttle lever into idle run position.
I will run position one . North flank.
Then slowly move the choke control to the run position.
If engine floods, move choke lever to run position ( ) and crank until engine starts.
The skirt should be adjusted so it just touches the floor in the run position.
Place chain brake lever / hand guard into the run position as shown in Illustration B.
When you hear the engine want to start, return choke knob to run position.
Company Sergeant, you run position two . East flank.
The stop switch is normally in the Run position.
Company Sergeant, you run position two . North flank.
Whenthe enginestarts, releasethe switch to the run position.
Move choke lever to run position ( pushed in completely ) and pull starter cord 15 to 20 times.
The switch must be in the Run position.
The start / stop switch automatically returns to run position.
The stop switch returns automatically to the Run position when it is released.
As the engine warms up, move the lever to the run position.
Company Sergeant, you run position two.
When the engine starts, return choke control to run position.
Place chain brake lever / hand guard into the run position as shown in Fig . 46.
When the engine starts, release the switch to the run position.
From an initially forwardly inclined or downhill run position shown in FIG.
When machine starts, let go of key and it will return to run position.
It springs back to the run position F.
As the motor warms up, move the choke control lever to the run position.
Move red lever ( B ) to run position.
Choke, After engine fires ( or 5 pulls ), move choke lever back to Run position.
The choke knob is in the normal run position F.
N Make sure all settings are correct choke shutter, stop switch in run position I.
As the engine warms up, move the choke control ( G ) to the run position Figure 5.
To disengage the lock, move the setting lever ( 1 ) back to the normal run position F.
With positions, I - normal run position.
As the engine warms up, move the choke control ( C ) to the run position.
N Move the stop switch ( 1 ) to the run position I.
As the engine warms up, move the choke control ( B ) to the run position.
Move the choke / run switch to the run position.
You'll also be interested in:
Examples of using Run
Show more
I could run this show from solitary
This is a toy factory run by old people
Run cables across foam gasket block
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
