Examples of 'safety reversing' in a sentence
Meaning of "safety reversing"
Safety reversing refers to a feature in technology or machinery that allows for the reversal of a process or action in order to prevent accidents or ensure the safety of individuals. This phrase is commonly used in the context of devices like garage doors or car sensors, which automatically reverse their motion if they detect an obstruction
How to use "safety reversing" in a sentence
Basic
Advanced
safety reversing
This safety reversing feature is extremely recommended.
Correctly connect and align the safety reversing.
Aligning the safety reversing sensors.
Safety reversing sensors wire open broken or disconnected.
Important informationaboutthe safety reversing sensors.
The safety reversing sensors do not effect the opening cycle.
Mounting and wiring the safety reversing sensors.
Safety reversing sensors slightly misaligned dim or flashing LED.
Important information about the safety reversing sensor.
Safety reversing sensors slightly misaligned dim or fl ashing LED.
Incorrect wiring between safety reversing sensors and operator.
Information you will need before you begin the installation of the safety reversing sensor.
When installing the safety reversing sensors check the following.
Safety Reversing SensorGap between floor.
Alternate floor mounting of the safety reversing sensors will require hardware not provided.
See also
If the operator lights blink, check the safety reversing.
When the opener is activated with the safety reversing sensor correctly installed and aligned.
Safety reversing sensors wire shorted or black / white wire reversed.
This feature activates the light on when the safety reversing sensor beam has been obstructed.
Optional For safety reversing sensor installation onto the wall or fl oor.
Check to see that area is clear between the Safety Reversing Sensors.
Check to see that the Safety Reversing Sensor wires are connected to the.
If the opener lights blink, check the safety reversing sensor.
Verify the safety reversing sensors are properly installed, aligned and free of any obstructions.
When the operator is activated with the safety reversing sensor correctly installed and aligned.
Remove safety reversing sensors from brackets and shorten sensor wires to 1-2 ft.
If the operator clicks, check the safety reversing sensor.
Check to see that the Safety Reversing Sensors ' wires are connected to the motor unit.
If the opener light blinks, check the safety reversing sensor.
Safety reversing sensors with 2 conductor white and white / black wire attached.
Check to see that the Safety Reversing Sensors are not misaligned.
If the sensor indicator lights do not light, replace the safety reversing sensors.
Cut the end of the safety reversing sensor wire, making.
Since 1993 garage door openers have been required to have a safety reversing mechanism.
Inspect the safety reversing sensor wires for a short ( staple in wire ), correct wiring.
Meaning, This message will appear if the Safety Reversing Sensors are miswired.
If your garage already haswires installed for the safety reversing sensors, proceed to page 25.
You'll also be interested in:
Examples of using Safety
Show more
Protocol for safety in sampling from shore
Safety culture is learning driven in the organization
Always follow the safety instructions carefully
Examples of using Reversing
Show more
Reversing valve for refrigeration cycle inversion
Replace belt guard by reversing above procedure
Reversing the polarity of the neutron flow
