Examples of 'sample holder' in a sentence
Meaning of "sample holder"
sample holder: A tool or device used to secure and store small samples for analysis or testing. This phrase is commonly used in scientific research or laboratory settings where specimens need to be preserved
How to use "sample holder" in a sentence
Basic
Advanced
sample holder
Such a sample holder exhibits numerous advantages.
Perfect catalyst and a perfect sample holder.
A sample holder is disposed in the lower chamber.
This tube surrounds the sample holder.
Here the sample holder itself is a thermocouple.
A vacuum chamber with motorized sample holder.
Sample holder is placed within cryostat.
Samples were packed powders in an aluminum sample holder.
The sample holder consisted of a shell.
Each sample was analyzed on a quartz sample holder.
Center the sample holder under the probe.
The material was prepared in a capillary sample holder.
On the sample holder and pipe sample is tested.
The sample is then dispensed in a sample holder.
The sample holder is placed on the lower platen.
See also
Place prepared sample in a sample holder.
A sample holder of the portable system is shown in an open position.
Polishing device with sample holder.
A round aluminum sample holder with zero background was used.
The powder is deposited on a hollow aluminum sample holder.
Open the sample holder.
The sample was simply placed on the sample holder.
The sample holder is then placed into the instrument.
Samples were prepared by spreading on a zero background sample holder.
The sample holder was centered with respect to the probe.
Improved sealant for sample holder.
The sample holder may be detachably connected to the removable closure.
The fiber was compressed tightly in the sample holder.
A blank spectrum of an empty sample holder was measured for comparison.
The compound was spread on a zero background sample holder.
Example of sample holder.
The pigments are filled up in a standard aluminium sample holder.
Membrane coupons are mounted in a sample holder for pervaporation tests.
A piece of superconductin wire placed onto the sample holder.
A liquid sample holder may be removably inserted in the hollow bore.
Check the correct volume calibration of the sample holder.
The sample holder may be rotatable with respect to the first closure.
Check that the temperature of the sample holder is stable.
The sample holder was placed on the top of the liquid distribution manifold.
The manual valve upstream of the sample holder is closed.
The sample holder has at least one wall containing filter membrane.
The sample is compacted manually into the sample holder.
Samples were placed on an aluminum sample holder and leveled with a glass slide.
The base is of sufficient área to allow placement of a sample holder.
The tips are pressed into the sample holder to provide a seal.
Material is mounted and analyzed on a front loading sample holder.
Each sample is mounted in a spinning sample holder in the spectrometer chamber.
The compound to be analysed was spread on a zero background sample holder.
The quartz vessels are positioned in the sample holder of the spectrofluorometer.
The analysis is carried out by reflection with a rotating sample holder.
You'll also be interested in:
Examples of using Holder
Show more
Support file holder on cutter top plate
Holder advertising material itemnumber price per
This battery holder part is not waterproof
Examples of using Sample
Show more
Engineer training and sample terms of reference
Sample of sequence of targets for newspaper microfilming
Mfi particulate sample mass collected at mode i mg
