Examples of 'sample inlet' in a sentence
Meaning of "sample inlet"
sample inlet - Refers to the point of entry or input where a sample is introduced into a system, equipment, or device for testing, analysis, or processing
How to use "sample inlet" in a sentence
Basic
Advanced
sample inlet
The sample inlet is shown in the left.
Any of these kits may include a cartridge a single sample inlet.
Check sample inlet pressure and flow rate.
Particles should be removed from the sample air stream at the sample inlet.
Pinch the sample inlet line to stop the sample flow.
The recovery unit can further comprise a sample inlet and a wash inlet.
The sample inlet system is designed for minimal loss of vacuum.
The sample absorbent is disposed within the casing opposite the sample inlet.
The flow in the sample inlet channel may be substantially parallel to the surface.
For introduction of the carbon dioxide into the analyser many sample inlet systems are available.
The sample inlet is formed as a hole penetrating the first substrate from front to back.
The ball valve on the raw sample inlet controls the flow to the filter.
The sample inlet can then be placed into contact with the collected sample.
The hollow body can be arranged between two holding means providing a sample inlet and outlet.
The device also includes a sample inlet port in fluid communication with the reaction chamber.
See also
A drop of whisky of volume 20 µl was placed at the sample inlet using a micropipette.
In certain cases, the sample inlet may comprise a blood separation means.
Blood samples to be analyzed by the system are introduced through a sample inlet 13a.
A sample inlet for introducing a sample of the biological fluid into the . device ;.
As a result, it is advantageous for sample inlet and gas exhaust.
Preferably, the sample inlet and the window are located in opposite sides of the casing.
In use, a fixed volume of sample can be introduced into the sample inlet port.
Figure 8 depicts the sample inlet module with the foil seal removed.
Preferably, the through hole is positioned higher than where the sample inlet is positioned.
The sample inlet may be back-washed with 2 ml buffer by using suitable valve arrangements.
Preferably, the through hole is located at a position higher than that of the sample inlet.
The sample inlet valves and suction / blowing valves can be opened to actuate the sample.
Therefore, the system is not subject to contamination from the sample inlet during backflushing.
This provides ports for sample inlet and outlet, and inlets for two calibration gases.
The sample containing the analytes is injected into the separation space through sample inlet 26.
The box preferably has connections for milk sample inlet tubes, signal cable, power cable etc.
In this manner, a multiple-channel pipettor can simultaneously load multiple samples into sample inlet ports.
Step 6 Connect the sample inlet and outlet ports.
Intake receptacle, vented channels and Fluidic Centripetal device sample inlet cap.
In other cases, the sample inlet contains a thermostabilising agent, such as glucose or Cibacron blue.
Cover 108 is removable to allow access to the additional sample inlet.
Sample inlet voltage settings,.
A solid substrate microfabricated to define, a sample inlet port ; and a mesoscale flow system comprising,.
Sample inlet conditions,.
One of the ports 70 can provide a sample inlet and the other can act as a vent.
The sample inlet and sample waste arms for sample injection were both 2.5 mm long.
The sample acquiring device 10 further comprises a sample inlet 18.
A support ; a sample inlet for deposition of the blood sample ; and.
The measurement cavity 20 is arranged in communication with the sample inlet 18.
The apparatus 1 comprises a sample inlet 2 for guiding a sample aerosol flow A into the apparatus 1.
The washed wet assay reagents were applied to the cartridge vía sample inlet port ( 226 ).
A sample inlet port ; and, a mesoscale flow system comprising,.
Attach the inlet hose to the sample inlet ( 1 ) of the photometer.
Above the sample inlet is provided with a through hole 135.
A sample stream may be introduced to the microfabricated movable member 110 by a sample inlet channel 120.
You'll also be interested in:
Examples of using Inlet
Show more
Attach inlet and discharge hoses to pump
Check and clean inlet hose screen
Place inlet hoses inside washer basket
Examples of using Sample
Show more
Engineer training and sample terms of reference
Sample of sequence of targets for newspaper microfilming
Mfi particulate sample mass collected at mode i mg
