Examples of 'saw shoe' in a sentence
Meaning of "saw shoe"
saw shoe - a past tense statement indicating that a shoe was seen or observed. This phrase is used in simple sentences to describe an action related to footwear
How to use "saw shoe" in a sentence
Basic
Advanced
saw shoe
Place the saw shoe on the workpiece.
The material nearest the saw shoe.
Adjusting the saw shoe angled cut.
Saw shoe adjustment for angular cutting.
Do not adjust the saw shoe during use.
Adjust saw shoe so blade cuts at desired depth.
Tighten the lever to lock the saw shoe in place.
Move the saw shoe into the desired.
Tighten the knob or lever to lock the saw shoe in place.
Swing the saw shoe downwards.
Tighten the locking knob to lock the saw shoe in place.
Ensure the saw shoe is secured in place before.
Make sure that the bottom edge of the saw shoe rests on the workpiece.
Rest the saw shoe on the workpiece in such.
Make sure that the teeth are pointing toward the slot opening in the saw shoe.
See also
Guide on the saw shoe as shown.
The saw shoe can be adjusted in order to rest properly on the workpiece.
Make sure that the saw shoe remains in contact with.
Set the bevel angle by tilting the saw shoe 11.
Rest the saw shoe on the workpiece in such a position.
Never use the tool when the saw shoe is loose or removed.
The saw shoe must lie firmly across the entire surface.
U Tighten the knob to lock the saw shoe in place.
Adjust the saw shoe so the blade cuts at desired depth.
Place the bottom edge of the sabre saw shoe 7 onto the work piece.
Pull the saw shoe forward and tilt it into the required angle.
Line, firmly pressing the saw shoe against the workpiece.
Loosen the locking knob ( 9 ) to unlock the saw shoe.
The front of the saw shoe has a kerf indicator for vertical and bevel cutting.
Holding the tool with both hands, work with the saw shoe pressed against the workpiece.
Make sure that the saw shoe remains in contact with the workpiece at all times.
Set the bevel angle by tilting the saw shoe ( D ) until the mark.
Whenever possible, the saw shoe must be held firmly against the material being cut.
Setting the adjustable saw shoe fi g. C.
The front of the saw shoe has a kerf indicator ( t ) for vertical and bevel cutting.
Insert the parallel fence ( o ) in the saw shoe ( f ) as shown.
The front of the saw shoe has a kerf indicator ( N ) for vertical and bevel cutting.
Insert the parallel fence ( r ) in the saw shoe ( f ) as shown.
Whenever possible, the saw shoe must be held firmly against the material being cut Fig . K.
Loosen the bevel adjustment knob ( 13 ) to unlock the saw shoe.
The front of the saw shoe has a kerf indicator I.
Tighten the bevel adjustment knob ( 13 ) to lock the saw shoe in place.
If possible, work with the saw shoe pressed against the workpiece.
Align the dust extraction adaptor ( 14 ) with the saw shoe as shown.
Slide the saw shoe ( d ) into one of the three settings.
The spanner wrench ( 8 ) can be stored on the saw shoe as shown in Fig . L.
The front of the saw shoe has a kerf indicator ( Figure 10 ) for vertical and bevel cutting.
Tilt the saw shoe ( 7 ) to the required position.
Move the saw shoe ( 5 ) into the desired position.
Slide the saw shoe ( 5 ) into the desired position.
