Examples of 'saw unit' in a sentence
Meaning of "saw unit"
saw unit", "context": "This phrase can have multiple meanings depending on the context. It could refer to a unit of measurement or a device used for cutting materials. In the context of woodworking or construction, it may refer to a power tool known as a 'saw unit', used for making precise cuts.
How to use "saw unit" in a sentence
Basic
Advanced
saw unit
Swivel the saw unit upwards again.
This to facilitate fitting the saw unit.
Robust saw unit for tough use.
There are two grease nipples on every saw unit.
Connect a compatible saw unit to the power pack.
The saw unit can then be moved downwards.
Slide the scale together with the saw unit until the ac.
Push the saw unit backwards at an even rate of advance.
Insert the suction on the corresponding port on the back of the saw unit.
A standard saw unit package contains the items as shown below.
In chin case the compressed air torches mounted on each saw unit are used.
The hole saw unit B must then be replaced.
Fully automatic, rapid height adjustment of the saw unit via light barrier.
Saw Unit yes.
We suggest the concept of saw unit from Attl a spol.
See also
However, the saw unit is specially designed with an extra stiff frame.
Double bearing of the wheels, saw unit guide by two columns.
Further, the saw unit also is slidable relative to the first slide mechanism.
For use as a bench-type circular saw the saw unit has to be fixed in place.
While holding the saw unit securely on the ground, pull the starter rope vigorously.
This causes the holder unit A and the hole saw unit B1 to rotate together.
The saw unit can be tilted at an angle of up to 45.
Re-adjust the end stop of the saw unit.
A circular saw unit 20 may be pivotally disposed above the turntable 5.
And safe cuts in stationary workpieces, i.e. the saw unit is moved.
Place the saw unit in „ cross-cutting “ position.
Professionals will appreciate the SuperCut 100 saw unit with automatic chain tension.
Saw blade too small ( ground too much ) Readjust end stop of the saw unit.
Unlocking the machine ( working position ) - Push the saw unit down slightly and remove the transport.
Although not shown, the positioning pin 19 may be incorporated into the first hole saw unit B1.
For bevel cuts, the saw unit can be set to any angle between 0 and 60.
Samsung, which has done well in the tablet market, saw unit sales fall by 13 percent.
The hole saw unit B comprises a cylindrical cutter 10 and a center pin 11.
