Examples of 'scan time' in a sentence
Meaning of "scan time"
This phrase refers to the amount of time required for a scanning process or the duration it takes to complete a scan. It is commonly used in the context of technology, medical diagnostics, or document processing. For example, 'The scan time for the MRI is approximately 30 minutes.' It specifies the time needed for capturing or analyzing data through the process of scanning
How to use "scan time" in a sentence
Basic
Advanced
scan time
Program scan time is too long.
Press the rocker switch or to change the scan time.
Scan time depends on the number of songs in the device.
Fast scan time.
The entire width of the conveyor belt is scanned during each scan time.
Specify precise scan time in the entry field in format.
The system can then make a decision of eventually the next scan time.
Average scan time.
You will be given barium sulfate to drink two hours before your scan time.
This results in a significant reduction in scan time while full resolution is maintained.
Such improvements can enable valuable increases in resolution sensitivity and reduction of scan time.
This can result in a waste of valuable scan time and increased scanning costs.
Setting the resolution to a high value increases the file size and the scan time.
Signals that are shorter than the scan time must be read and counted.
The MR scan time is about an hour per patient.
See also
Select a value for the Scan time setting.
The scan time depends on the capacity of the SD card.
This study aimed to shorten the scan time and still produce high quality images.
Scan Time or QUAD function to use only in the case of several cameras.
You can change the scan time in the Various menu.
Select values for the settings Scan day and Scan time.
Disabling the port will reduce the scan time for the Processor Adapter.
The scan time is the time between re-scan of the same volume.
This setting can be edited if the Limit file scan time check box is selected.
You can shorten the scan time and speed up Kaspersky Endpoint Security.
TimeLimit Maximum object scan time sec.
If the scan time exceeds the specified limit, the scan ends with error verdict ;.
Move the joystick 8 up or right or down or left to set the scan time.
The default setting for the scan time per single code is 1 sec.
The scan time can be set as described in the chapter " User settings.
In the absence of a match, the cellular scan time period set to a default value.
In the Scan time field, apply the start time.
If necessary, you can reduce the object scan time by using the following methods.
That is, the PLC device repetitively performs a one time execution procedure for a scan time.
Although this would at least double the imaging time, the scan time nevertheless remains feasible.
Last Scan Time - Last time the agent was scanned.
This may enable a user to minimise a scan time of the object ( s ) being built.
Scan time in menu mode 0 to not scan.
The total body scan time was 2 minutes.
Scan time in menu mode 0 for do not scan.
If this feels uncomfortable, you can switch to 3 sec. scan time per single code.
The maximum scan time for each method was 30 minutes.
The SRR is 1Mhz for 1 µs axial scan time response.
System scan time and minimum monitoring period;Footnote5.
Such greater angle requires a greater scan time than required for gap 181.
Scan time varies depending upon your doctor 's request ; the average scan time is 45 minutes.
The DeltaScan FS reduced scan time to 18 seconds.
Much as you use sensors to scan space . In my century, we can scan time.
RE TRIGR ( Re-trigger scan time watchdog ) is used to extend the maximum.
In the illustrated example, the idle time 313 extends across scan time lines.
