Examples of 'screw' in a sentence
Meaning of "screw"
Screw (noun): A metal fastener with a tapered and threaded shank, used to join pieces of wood together by being rotated into them. For example, 'He tightened the screw in the hinge to fix the loose door.'
Show more definitions
- A device that has a helical function.
- A simple machine, a helical inclined plane.
- A (usually) metal fastener consisting of a partially or completely threaded shank, sometimes with a threaded point, and a head used to both hold the top material and to drive the screw either directly into a soft material or into a prepared hole.
- A ship's propeller.
How to use "screw" in a sentence
Basic
Advanced
screw
Tighten the screw through the clips.
Screw the two sections of pole together.
Remove the screw on the rear coupler.
Screw in its new position tightening carefully.
Shoot and you screw up your life.
Screw both screws on the rear side.
You should not screw before work.
Screw each side seal to the cabinet.
Fluid control screw not open enough.
Insert washer and thread nut to screw.
Try not to screw up like you usually do.
Turn two full turns on each screw.
Loosen the screw at the rod extensions.
Inserting and removing a drill or screw bit.
You will screw the time thing up.
See also
They just say that to screw us over.
Tightening a screw with the impact driver at an.
Cryotubes with external thread screw cap.
Place set screw on flat end of shaft.
I will kill you if you screw this up.
Remove screw covers on the left side of.
This will loosen screw inside chuck.
Just screw signing the guest book.
I am gonna really screw with this one.
Set screw under the tail cover.
Hang out and screw hot chicks.
Connect it altogether with the screw ring.
Let us not screw it up over something stupid.
The encoder is connected through screw terminals.
Insert a screw through the large opening in.
You are not supposed to screw the merchandise.
Do not screw up your lips too tight.
I told you not to screw with them.
Tightly screw on the plug by hand only.
Secure the guard with the screw.
Truss head screw or flush surface screw.
Thread the tip on to the screw carefully.
Tighten the screw to keep it from slipping.
And do not be chintzy with the screw.
Surface mounted screw mount or self adhesive.
Loosen the mitre angle locking screw.
Fine adjustment screw for stretch stitches.
Secure the camera tray with screw.
Tighten the thumb screw slightly to secure it.
Fix the unit on the bracket by a screw.
Loosen the screw securing the lever.
Then tighten the clamp screw securely.
You will screw anything with legs.
Plug unused hole with screw included.
To undo tight screw connections in manual operation.
