Examples of 'sealing pressure' in a sentence
Meaning of "sealing pressure"
sealing pressure: 'Sealing pressure' typically refers to the amount of force or tightness applied in order to secure or close a seal, such as in a mechanical or industrial context where maintaining a seal is crucial for proper functioning or containment
How to use "sealing pressure" in a sentence
Basic
Advanced
sealing pressure
Adjustable seedling sealing pressure and planting depth.
The thickness of the membrane is dependent on the sealing pressure.
Vascular tissue sealing pressure control.
The result is that the downstream pressure equals the valve sealing pressure.
The necessary sealing pressure can therefore be correspondingly reduced.
It is of less importance to achieve sealing pressure in the lower region.
A suitable sealing pressure is readily selected by the person skilled in the art.
Seals or coatings may be used to increase sealing pressure or robustness.
This closely tracking sealing pressure enables a quick transfer to expiratory control if necessary.
The contact pressure increases and the sealing pressure also increases.
The sealing pressure was controlled via air line pressure to the heat sealing machine.
The tension may generate a sealing pressure against the stoma.
The initial sealing pressure is generated by the arm 's interference with the barrel wall.
The desired sealing movement and desired sealing pressure are imparted to the machine part.
Naturally the sealing pressure used has a considerable influence on the function of the sealing.
See also
The weld area is further weakened by a recess formed by the sealing pressure during welding.
By such means, a sealing pressure may readily be applied.
After the sealing, a cooling time follows during which the sealing pressure is maintained.
Thus, the sealing pressure in a localized área is increased.
If the pressure is not high enough, the sealing pressure will not automaticallly start.
Therefore, the gasket can seal around the water holes Hw4 at moderate sealing pressure.
Any discontinuity in the sealing pressure could lead to seal leakage.
Also, the inclined portion B10d provides resilient sealing pressure thereat.
As a result, equal sealing pressure is not obtained at the sealing means.
Therefore, the gasket C can provide a high sealing pressure when tightened.
Instead, wide sealing pressure is formed around the cylinder hole Hc.
However, the gasket B can provide strong sealing pressure around the water holes.
The sealing pressure is held constant at 275 kPa.
The samples were pressed for 1 second under a heat sealing pressure of 1 kg / cm.
As a result, the equal sealing pressure is not applied to the sealing means.
An O-ring 63 may also be used to ensure positive sealing pressure against leaks.
Furthermore it maintains a constant sealing pressure of the skirt [ 33 ] over the tube optimizing vacuum preservation.
The conductor regions 28 and 29 should also abut with adequate sealing pressure.
The first is to increase the sealing pressure of the neck 19 on the injection tip 32.
The surface 59 can form a cone or " V " for increasing the sealing pressure in a localized área.
A suitable sealing pressure is especially 500 to 700kPa depending on the heat sealing machine used.
Thereby, the sealing member 24 applies a certain sealing pressure on the upper lid 17 of the capsule.
In this gasket 25, the bead 27a only provides a sealing pressure around the hole Hc.
In the gasket 20, the bead 22a only provides a sealing pressure around the cylinder hole Hc.
You'll also be interested in:
Examples of using Pressure
Show more
No effect on blood pressure or pulse rate was observed
Pressure transmission pipe in the combustion chamber
We were under a lot of pressure because of the family
Examples of using Sealing
Show more
The foil sealing strip becomes hot
Immediately remove all excess sealing material
Sealing face for open measurement flange
