Examples of 'sealing washer' in a sentence
Meaning of "sealing washer"
A sealing washer is a type of washer used to create a watertight or airtight seal between two surfaces. It is commonly used in plumbing and automotive applications to prevent leaks
Show more definitions
- A rubber or neoprene washer, sometimes metal-backed, typically placed on a fastener to prevent water from migrating into and through the fastener hole.
How to use "sealing washer" in a sentence
Basic
Advanced
sealing washer
Only tighten the sealing washer by hand.
The sealing washer and screw have a close fitting tolerance.
Remove drain bolt and sealing washer.
Inspect sealing washer and replace if damaged.
Remove oil drain screw and sealing washer.
Reinstall sealing washer and oil drain screw.
Reinstall the drain plug and sealing washer.
Replace sealing washer if missing or damaged.
Do not forget the sealing washer.
A sealing washer was then placed in the bottom of the lined can.
Cowper stove side sealing washer.
Rubber side of sealing washer should fit against inside wall of tank.
Install the drain bolt securely using a new sealing washer.
Ensure that the sealing washer is still in place on the plug.
Attachment for correctly fastening screws which have a sealing washer.
See also
Replace sealing washer.
Install the drain plug securely using a new sealing washer.
There may also be a sealing washer under the fixing screw.
Remove the transmission oil level check bolt and sealing washer.
Install a new sealing washer and drain bolt and tighten the bolt securely.
Use a depth gauge suitable for the diameter of the sealing washer accessory.
Insert a new handle sealing washer with the flat side into the gun housing.
The second sealing part can on the other hand be a substantially annular sealing washer.
The sealing washer is formed by a metal washer ;.
Be careful not to lose the sealing washer found on most cars!
Prepainted metal or aluminium capping with preassembled expanded element underneath, and sealing washer in PVC.
In a further exemplary embodiment a sealing washer 3 can additionally be placed at the same position.
It is thus proceeded until the protective tube 4 contacts the sealing washer 5.
Depth gauge - controls compression of the sealing washer to help ensure a tight seal.
The sealing washer 3 consists of steel.
Refer to the screw manufacturer 's specifications for the proper sealing washer settings in different applications.
NOTE, Make sure sealing washer remains in the same position.
Solar fastener cone point and sealing washer 19 mm.
Another sealing washer is provided between the collar 18 and the upper part of the cap 17.
For larger screw-terminal and snap-in capacitors the sealing washer is made of a plastic material.
Remove the engine oil filler cap, drain bolt, and sealing washer.
An external self sealing washer 27 is provided.
Remove the oil filler cap / dipstick, the drain bolt and sealing washer.
The spring reacts against a sealing washer 83 and the closed end 32 of the collar moulding.
To the valve 24 is fixed a tube 25 containing a sealing washer.
Although not shown, it is possible to make the sealing washer 3 integrally with the ring 2.
Install the 10 15 mm drain bolt securely using a new sealing washer.
Particularly, the sealing means are formed by the sealing washer 5 and the sliding lead-through 2.
Reinstall the oil drain plug ( 8 ) and sealing washer.
Accessory type: Sealing washer.
At the opposite end, the cylinder 21 is largely open with its sealing washer 3.
The flat sealing annulus 24b is identical with the sealing washer 24 or 24a of the other Figures.
You'll also be interested in:
Examples of using Sealing
Show more
The foil sealing strip becomes hot
Immediately remove all excess sealing material
Sealing face for open measurement flange
Examples of using Washer
Show more
Insert washer and thread nut to screw
The following is a guide to using your washer
This pressure washer is designed for cold
