Examples of 'second pause' in a sentence
Meaning of "second pause"
Second Pause: Indicates a short break or moment of silence. This phrase is often used in public speaking, presentations, or writing to create emphasis, allow time for reflection, or signal a change in topic
How to use "second pause" in a sentence
Basic
Advanced
second pause
Series of flashes separated by one second pause.
Half a second pause before the pattern repeats itself.
Then the exercise provides a second pause of another four seconds.
The process must revert to recording only as soon as the second pause begins.
Twenty second pause.
Press this button while programming the memory keys to insert a two second pause.
Six second pause.
This sequence of alternately playing back and recording continues until a second pause is initiated.
Another possible cause is viewer initiation of a second pause immediately after initialization following a first pause.
You will hear the agitator rotate, followed by a several second pause.
After the one second pause slowly lower the weights to the starting position and repeat.
The phone can generate a 4 second pause time.
There is a 5 second pause between the individual switching operations.
When in programming mode, press this button to insert a two second pause.
The burner will restart after a 1 second pause once the button is released.
See also
Each rattle lasts approximately half a second, with a quarter of a second pause between.
There should be a 30 second pause between each subsequent measurement at successively higher shear rates.
The pilot light will blink 4 times in two seconds, followed by a two second pause.
The second pause is noted in the Time Sequence diagram as PAUSE 2.
Use the Pause softkey to insert a 2 second pause.
Add a 2 second pause after the track.
In case of a failure, both LED 's blink a number of times followed by one second pause.
There was a good 30 second pause in the conversation.
Second pause between recordings - see “ Recording with automatic start “.
Switch legs after a 5 second pause.
Press PAUSE to insert a 2 second pause when dialing out-going phone numbers.
Note, For all the following setup procedures, the display will automatically reset after a 30 second pause.
Pressing REDIAL ( PAUSE ) adds a three second pause in the number field.
Pressing the RD / P button while storing a telephone number will insert a four ( 4 ) second pause.
Short flashes 1 second pause 3 short flashes.
If there are two or more codes, there will be a 2.5 second pause between each.
This is followed by a 180 second pause to protect the battery.
In Store mode, press LNR / Pause to insert a 4 second pause in a memory.
To insert a two ( 2 ) second pause press the AUX key.
Duration of contact should be approximately one second, with a 10-15 second pause between contacts.
Note, When switching between Soil / Timings, there is a one second pause before detection continues.
Tone, followed by a 1 second pause.
Tip, Popcorn is done when there is a 1-2 second pause between pops or if the.
You'll also be interested in:
Examples of using Second
Show more
And so began my second taste of country life
Second female in the room uses mouthwash
They were sourcing a second signal when it happened
Examples of using Pause
Show more
He seems to have pressed pause or retired altogether
Pause pauses the currently playing track
Maybe we should pause for station identification
