Examples of 'secure the cable' in a sentence
Meaning of "secure the cable"
Secure the cable means to fasten, protect, or ensure the safety of a cable, typically by fixing it firmly in place or implementing security measures to prevent unauthorized access or damage
How to use "secure the cable" in a sentence
Basic
Advanced
secure the cable
Secure the cable terminal as shown below.
Do not forget to secure the cable with.
Secure the cable to the cable clamp.
Use a cable tie to secure the cable.
Secure the cable firmly in the cable duct.
Tighten the screw to secure the cable in place.
Secure the cable by fastening the clamp screw.
And managed to secure the cable.
Secure the cable with a clamp.
Strength members secure the cable to the closure.
Secure the cable connector firmly as shown below.
Tighten the knob and secure the cable.
Secure the cable using clips or tacks as appropriate.
Tighten the wire clamp to secure the cable.
Secure the cable with the cable clampe.
See also
Tighten the strain relief to secure the cable.
Secure the cable away from the battery.
A pressure clamp can be used to secure the cable.
Secure the cable with the thumbscrews on the connector.
I will secure the cable.
Secure the cable to prevent pulling the tool off.
Wedge to secure the cable.
Secure the cable to prevent pulling the tool over.
Press and twist clockwise to secure the cable end.
Secure the cable connection with the screws provided.
Tighten the screws that secure the cable management cover.
Secure the cable with ties as needed ties not provided.
Tighten the cable screws to secure the cable to the connector.
Secure the cable to keep it from falling into the drain.
Then tighten the cable clamp to secure the cable to the gearmotor.
Secure the cable by clamping the plug to the cable see detail.
Tighten the jam nuts to secure the cable assembly to the support.
Secure the cable with the wire mesh under the platform.
Be sure to use a cable clamp to secure the cable to the junction box.
Secure the cable ends with the cable drum retaining screw.
Snap the wire clips in place to secure the cable to the printer.
Secure the cable to the electrical box at the appropriate connector position.
Tighten the jam nut to secure the cable when correct adjustment is reached.
Secure the cable to prevent pulling your heatgun off the stand.
Snap the wire clips into place to secure the cable at the printer.
Secure the cable to prevent pulling the tool off the workbench.
Turn the ring clockwise on both ends of the cable to secure the cable.
Use the clips to secure the cable along the tubes and hose.
Insert the cable in the hood and tighten the wire clamp to secure the cable.
Secure the cable onto the control board with the holder clamper.
Use hot glue where necessary to secure the cable flat against the riser.
Always secure the cable with clips to your clothing or even better to a sweatband.
Press and twist clockwise to firmly secure the cable end to the lid pump housing.
To secure the cable you may require additional screws and cable binders.
A locking sleeve is provided to secure the cable within the body of the coaxial connector.
You'll also be interested in:
Examples of using Secure
Show more
Have your men secure the floor
Secure the coaxial cable to the ceiling
Get him to a secure room under observation
Examples of using Cable
Show more
Secure the coaxial cable to the ceiling
A cable tie is provided with the appliance
Use plenum rated cable where it is required
