Examples of 'select setting' in a sentence
Meaning of "select setting"
Select setting is typically used in reference to choosing or adjusting the specific configuration or options on a device, system, or application. It involves picking the desired preferences or parameters to customize the functionality or appearance according to personal preferences or requirements
How to use "select setting" in a sentence
Basic
Advanced
select setting
Shows what channel select setting has been selected.
Select setting and blend ingredients to desired consistency.
Use navigation keys to select setting for cold lamination.
Paper select setting at the time of shipment depends on the model.
This will display the scene select setting menu.
Press to select setting and move arrow icon to the bottom line.
Use the left and right arrow buttons to select setting.
This function is used for select setting temperature range option.
Select setting items with the arrow buttons and press OK to set it.
In the menu Open submenu or select setting.
Display the scene select setting menu from the setup menu to configure scene select settings.
In the menu Quit submenu or select setting.
Select setting OFF and push the door latch to the left.
Enable temperature compensation Select setting inP and turn rotary button to the right.
Select setting depending CycleOps Indoor Cycle model you own.
See also
The sound field are selected automatically according to the Scene Select setting on your TV.
Select Setting II on the appliance and check the water temperature.
HAMP and then wAUDIO SEL repeatedly to select the desired Audio input jack select setting.
The Input Select setting tells the system which input it should use.
This option is available when you select Photo or Music in the Scene Select setting.
Select Setting alarm clock ON using button and.
First, display the scene select setting menu.
Select Setting alarm clock OFF using button and.
Check that the input select setting is correct page 9.
Select setting for option, short press on Mode button.
If you have sensitive skin select setting 1 the first few.
Select setting level - Tap the rotary push button.
The phone generates a 2-second long sample ring at the select setting for loudness verification.
That is, a menu to select setting or cancelation of remote service activation may be displayed.
After choosing a signal source, select Setting.
You can also select setting in the menu that appears by usingMULTI-CONTROL.
Once tension has begun to dissipate, select setting II and gradually begin.
Switch on the blender for several seconds if the appliance features quick-action operation, select setting M.
If you have sensitive skin, select setting 1 the first few times you use the appliance.
Hold down the Compass Button for 3 seconds to select setting display.
U Select setting mode, Press and hold the SuperFrost.
Did you use the right Fabric Select setting for the load being washed?
Select setting 3 on the setting control.
Press the PREVIOUS / NEXT button to select setting item and press the MENU button to.
Last 10 minutes of cooking increase temperature and select setting 1.
The current Unit Select setting flashes on the display, as shown below.
Press LEFT / RIGHT cursor buttons on the RC to select setting page.
The Master / Slave / Cable Select setting for the drive is determined by the mode jumper.
During first operation select setting 3.
R, -- pattern select setting that match expression.
Press the cursor buttons ( or ) to select setting you desire.
Press, select Setting > General settings andpress ( right ) to enter the menu.
Note, When using for the first time, select setting.
At the Code field select setting code value ‘ 17.
Start as Compass Calibration usual - ( like you would select setting 7 ).
You'll also be interested in:
Examples of using Select
Show more
Select the data to display on that line
You can not select multiple events
Select and implement risk management system
Examples of using Setting
Show more
I am setting the bar low so we are not disappointed
Adjust the volume setting to an audible level
Setting the running date and time
