Examples of 'select the signal' in a sentence

select the signal - To 'select the signal' means to choose or pick a specific communication or indication among different options or channels

Select the signal source of the sub display.

Turn on the projector first and then select the signal sources.

You can select the signal input mode.

In case of a Generic signal, the menu shows an option to select the signal bandwidth.

Select the signal strength for the wireless network.

This switch is used to select the signal that is sent to the Line Output.

Select the signal source from the multiple input sources.

DVI button Press to select the signal input to the DVI connector.

Select the signal source from which you want to record.

A switch 6 is used to select the signal to be processed.

Select the signal receiver mounting location according to the following conditions.

Use the input selector switches to select the signal sources connected to channels 1 and.

Select the signal source for the process value that controls the motor.

Please be careful when connect, select the signal source and control the output level.

Select the signal your TV is receiving.

See also

select the service

select the services

select the size

select the software

Turn the knob TRACK / ENTER to select the signal source.

You can select the signal source sent to the.

Within the sub-menu „ Extras “ in the main menu you can select the signal strength display.

You can select the signal black level according to the input signal.

With this switch it is possible to select the signal displayed on the VU-meter 2.

Select the signal source for the sub-picture with the button or.

Slide EU / UK to select the signal received.

Select the signal type for the module input AI1 switch.

If you have Digital cable TV, select the signal source for both Analog and Digital.

Select the signal output from the RGB / COMPONENT connector on the camera.

Use the input selector buttons to select the signal sources connected to the channels 1-5.

Select the signal format with M / m and press ENTER or.

With the 2 TRK-switch, you can select the signal source of the monitor system.

You can select the signal format so that the receiver can receive high resolution 4K signals.

Press to highlight “ Air / Cable ”, then press to select the signal source.

Press to select the signal input to the HDMI port.

When you want to use a computer with SXGA+ panel, select the signal from “ Preset Signals . ”.

You can select the signal source for the PIP window image.

It allows the user to select the signal polarization between Vertical / Right.

Select the signal sources connected to the channels 1 to 5 with the selector buttons 3.

With the selector buttons ( 3 ) select the signal sources connected to the channels CH 1 to CH 4.

Select the signal input from the RGB1 or RGB2 connectors.

Air / Cable - Select the signal type.

Select the signal volume Loud, Soft, or Off.

In the StealthID tab, select the signal types to auto-identify see " Menu tree " figure 7.

Press to select the signal input to the INPUT2 connectors.

Examples of using Select

Select the data to display on that line

You can not select multiple events

Select and implement risk management system

Show more

Examples of using Signal

Give me a signal when you want me to start

You have to use one signal at a time

Signal strength indicating connection between units

Show more

1-200 1k 2k 3k 4k 5k 7k 10k 20k 40k 100k 200k 500k 0m-3 0m-4 1m-1 1m-2 1m-3 1m-4 2m-1

Sentences in English

select the signal