Examples of 'selected camera' in a sentence
Meaning of "selected camera"
Selected camera refers to the process of choosing a specific camera from a range of options available. It implies that one has made a decision on which camera to purchase or use for a specific purpose
How to use "selected camera" in a sentence
Basic
Advanced
selected camera
The currently selected camera is shown on screen.
Press to play a song on the selected camera.
The selected camera or camera channel has no recordings.
The number of the selected camera is shown.
The selected camera will be deleted from the device list.
Set the name of the selected camera.
The selected camera is deleted.
Online store listings for selected camera.
Removes the selected camera from the list.
The settings are applied for the selected camera.
Selected camera indication.
Enter a name for the selected camera.
Turn the selected camera On or Off in the main display.
Press and hold to talk to the selected camera.
The currently selected camera number is displayed, along with its status detected or not detected.
Live recording recording of a selected camera in full screen format.
Select whether activity detection is on or off for the selected camera.
The channel number for the selected camera is shown on screen.
Click this button to test the connection to the selected camera.
VMD must be enabled on the selected camera for the Walktest option to.
The system will try to connect to the selected camera.
Outputting the selected camera image using the CAMERA STATUS / SELECTION button.
The network settings for the selected camera are displayed.
The number in the left upper corner of the screen indicates the selected camera.
The setting applies to the selected camera input only.
For further information, refer to the Operating Instructions for the selected camera.
Open the shortcut menu for the selected camera and click on Edit.
Press the WIPER/AUX1 button to operate the wiper on the selected camera.
If no video signal is detected from the selected camera input, the monitor is black.
Press the DEF/AUX2 button to operate the defroster for the selected camera.
If no video signal is detected from the selected camera input, the picture is blue.
The digital recorder shows the video pictures of the selected camera input.
The user can then switch to the selected camera by pressing a " Control now " menu item 304.
Click Wizard to begin configuring the selected camera.
Click this button to remove the selected camera from the list.
Click About to show the general information of the selected camera.
Available options vary depending on the selected camera mode.
No . XSplit VCam only gets the video feed from your selected camera.
This option is used to enable or disenable selected camera recording.
Click Change IP to modify the IP address of the selected camera.
Phono audio output for passing on the selected camera signal.
Simply press the xmarty 's button to trigger the selected camera.
Phono video output for passing on the selected camera signal.
Take Photo - Take a photo with the currently selected camera.
Pressing the individual camera buttons will cause the selected camera to display full screen.
Protocol, Shows the protocol of the selected camera.
Click Link to connect the selected camera.
Disconnect, Disconnects from the selected camera.
Freeze, Freeze live image of the selected camera.
Display the attributes of currently selected camera 1-4.
You'll also be interested in:
Examples of using Camera
Show more
Do not leave the camera on the floor
The camera should be installed by a trained professional
I connected the camera cable the laptop
Examples of using Selected
Show more
Display the selected map features only
Selected bibliography on the law of transboundary groundwaters
The respective option selected is highlighted in colour
