Examples of 'sensor cable' in a sentence
Meaning of "sensor cable"
sensor cable ~ refers to a cable that connects a sensor to another device or system. It is used to transmit data or signals from the sensor to the receiving device, allowing for the monitoring or control of various processes or conditions
How to use "sensor cable" in a sentence
Basic
Advanced
sensor cable
Connect the sensor cable to the controller.
Connect sensor connection and sensor cable.
The heart rate sensor cable through it.
On no account pull or twist the sensor cable.
Secure the sensor cable with cable ties.
Prior to connecting the touch sensor cable.
Temperature sensor cable too close to a power cable.
This facilitates construction of the sensor cable.
Connecting the sensor cable to the signal converter.
This facilitates use of the sensor cable.
Check defrost sensor cable for proper connection.
This facilitates manufacture of the sensor cable.
Disconnect the sensor cable from the controller.
Optional extension of floor sensor cable.
Ensure the pressure sensor cable is connected as follows.
See also
Repeat these steps for each sensor cable.
Disconnected sensor cable lead inside the controller.
Broken wire in the sensor cable.
The pressure sensor cable is prewired to the controller.
This enables construction of a relatively thin sensor cable.
Plug in power cord and sensor cable if equipped.
The sensor cable is too short.
Disconnect sensor from sensor cable connector.
Check sensor cable for damage.
Do not pull or overly strain the temperature sensor cable.
Reattach sensor cable inside panel.
Use ordinary doorbell cable to extend the floor sensor cable.
Electromagnetic sensor cable and electrical configuration therefor.
The following instructions describe the connection of the sensor cable.
The sensor cable must always be inserted before installation.
Disconnect the fl ame sensor cable from the fl ame sensor.
Sensor cable codes for length and type options.
Connect the external temperature sensor cable to the indoor unit.
Detach sensor cable before setting side panel aside.
Plug the connector for the sensor cable into the socket.
Sensor cable câble du capteur sensorkabel cable de sensor cabo do sensor.
You can change the direction of the remote control sensor cable.
Remove the sensor cable connected at the sensor end.
The high pressure water mist system is triggered by a heat sensor cable.
Insert the sensor cable through the immersion assembly.
Optional extension cables may be purchased to extend the sensor cable length.
The sensor cable for the cistern is to be installed in a protective pipe.
It is not necessary to disconnect the sensor cable from the controller board.
Sensor cable series.
Do not run the pressure sensor cable alongside the input or output wiring.
Possible for the customer to extend the length of the level sensor cable.
Connect the sensor cable to the terminal connection board shown above.
The present disclosure also relates to a system comprising such sensor cable and to a method.
The sensor cable must be heading towards the back of the vehicle.
Be careful not to rip the thermal sensor cable as you remove the optical drive.
You'll also be interested in:
Examples of using Cable
Show more
Secure the coaxial cable to the ceiling
A cable tie is provided with the appliance
Use plenum rated cable where it is required
Examples of using Sensor
Show more
Search for the sensor or check batteries
Sensor readings and radio communications are terminated
An integrated light sensor also measures brightness
