Examples of 'sensor surface' in a sentence
Meaning of "sensor surface"
sensor surface: The area of a device or equipment where sensors are located to detect and respond to physical stimuli or changes
How to use "sensor surface" in a sentence
Basic
Advanced
sensor surface
Check whether the sensor surface is clean.
The sensor surface was finally blocked with ethanolamine.
Always keep the sensor surface clean.
The sensor surface may be a cam.
Do not touch the camera sensor surface.
The sensor surface was completely regenerated in between the cycles.
The matrix occupies most of the sensor surface.
Any suitable sensor surface may be used.
An antibody capture system was prepared on the sensor surface.
The magnetic label on the sensor surface is then detected.
This signal increases in proportion to the oxygen concentration present at the sensor surface.
Avoid placing any objects on sensor surface possible error signalization.
In a preferred embodiment, the biochip is applied directly to the sensor surface.
The antibodies were then passed over the sensor surface at various concentrations.
The sensor surface is completely flat, no structures, wiring or passivation are required.
See also
These were passed directly over the sensor surface and the interaction measured.
Sensor surface made of metal processing, can extend its service life.
Use the blower to clean the image sensor surface and the surrounding area.
When measuring your pulse, place your index fi nger directly on the sensor surface.
The amount of protein interacting with the sensor surface during the injection was determined.
Monoclonal antibody supernatants were captured onto the anti-mouse Fc sensor surface.
Immobilization of platelets to the sensor surface can be effected with many different immobilization technologies.
Biacore ™ assay dual binder on sensor surface.
The sensor has a sensor surface that is essentially flush with the recess surface.
Indoor corridor Radar microwave motion activated sensor surface mounted led ceiling light.
Preferably, the sensor surface is located at the bottom of the sample container.
Using over-scanning means substantially the whole of the sensor surface is used.
The presence of bubbles on sensor surface can cause a slight error in SG measurement.
Freedom from fouling and easy cleanability thanks to uniform, unbroken sensor surface structure.
Blow off dust on and around the image sensor surface using a blower for camera cleaning.
FC3 was used as surface control to determine unspecific binding to the dextran-SA sensor surface.
The sample container may further comprise a sensor surface comprising a second binding molecule.
The sensor surface is then exposed to the sample ( s ).
Activated / deactivated sensor surface served as reference.
Thus, it is possible to minimize non-specific binding on a sensor surface.
In certain embodiments, the sensor surface is a nanostructured electrochemical detection electrode.
Each sensor reaction is confirmed by the beep . Keep the sensor surface clean at all times.
In certain embodiments, the sensor surface provides a response that is charge dependent.
Easily cleaned and fouling-free owing to uniform, unbroken sensor surface.
Light reflected from the sensor surface is imaged on a " two dimensional photodetector device ".
As an example, pixel subsets 705 are regularly distributed over the entire sensor surface.
The sample solution will be held on the sensor surface for a wetting period of 30 sec.
The sensor surface is located 30 mm away from an aperture having a 3 mm diameter.
A method for measuring a distance between a sensor surface and a target, the method comprising,.
The sensor surface 51 preferably should lie mainly in parallel to the air flow.
The response observed when the oil reaches the sensor surface is shown in Figure 9.
In certain embodiments, the sensor surface is a field-effect transistor, a microcantilever, or an electrochemical sensor.
An anti-glycoprotein antibody ( a ) is immobilized on the sensor surface at the bottom of the well.
Sensor surface preparation and interaction analyses were performed at 25°C.
After each experiment, regeneration of the sensor surface was performed with 10 mM NaOH.
You'll also be interested in:
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
Examples of using Sensor
Show more
Search for the sensor or check batteries
Sensor readings and radio communications are terminated
An integrated light sensor also measures brightness
