Examples of 'separation force' in a sentence
Meaning of "separation force"
separation force: A term used in physics to describe the force applied to separate two objects or substances that are joined together. This force is often used in mechanics and engineering to determine the strength or resistance needed for separation
How to use "separation force" in a sentence
Basic
Advanced
separation force
Roll separation force is the net force exerted on the strip.
The configuration may be varied to obtain a desired separation force of the components.
The separation force is measured according to the method described in the below.
Generally it is desirable that the separation force is evenly distributed about the nozzle.
The separation force is achieved by relative rotation of the cap and the nozzle.
The magnetic shield is configured to reduce the separation force experienced by the movable terminal.
The maximum separation force was used as a descriptor of adhesion for all materials.
This embodiment could be used for an intermediate shaft having a high predetermined separation force.
By this means this separation force can be chosen to be suitable for a particular fabric.
For discontinuous reinforcement composites, it is the separation force which is measured.
The separation force of a system is a combination of the flux density and the field depth.
Once pressed together, the force to separate them is the separation force.
For example the separation force may be transmitted evenly to opposing sides of the cap.
Again these constructions co-act with the others provided, to provide a combined separation force.
The required separation force is typically beyond that encountered while wearing the garment.
See also
The release of the force applied to the mat 32 may provide a very small separation force.
Measuring the separation force The samples should be measured immediately after converting.
The acceptance criterion was that the remaining separation force was 90 or more.
The Separation Force was then recorded.
Preferably for strip thicknesses above 1 mm the roll separation force is less than 0.45 kN.
Generally speaking, separation force is increased as engagement force increases.
The resiliency of O-ring 88 will also provide a separation force.
The separation force continuously exerted on the squeezing rolls by the product is measured ;.
Fig . 5 is a graph of the actual separation force for the preferred embodiment of Fig . 1 ;.
The separation force then decreases as the deformable strap 42 unfolds.
Table 2 shows the separation force values observed for the coated and fused non-woven fabrics TABLE 2.
A separation force of 10 g was determined for a tape width of 1 cm.
Measuring a separation force exerted on said squeezing rolls by said cast product ; and.
A separation force of 3.5 g was found for a film width of 1 cm.
The right-angle separation force of the anchoring means 8 is less than or equal to 15 N / cm.
The separation force was determined with a pulling speed of 150 mm / min.
This separation force is expressed in N / cm.
You'll also be interested in:
Examples of using Separation
Show more
Total separation between product and propellant
Optical distortion and separation of secondary image
Separation of the judiciary from the executive
Examples of using Force
Show more
With the sheer force of the blast
Force them to tell us where the shards are
Excessive use of force by law enforcement officials
