Examples of 'servo output' in a sentence
Meaning of "servo output"
The term 'servo output' commonly relates to the signal or feedback generated by a servo system, which is a control mechanism that operates based on error signals. It involves the precise control and adjustment of the output based on the desired input or reference value
How to use "servo output" in a sentence
Basic
Advanced
servo output
To add a servo output model start warning.
Connect the pushrods to the servo output arms.
Fit the servo output arm on the servo.
For each individual servo output.
Cut down the servo output arm as shown in the photo.
Fit the output screws to secure the servo output arms.
Cut down the servo output arms as shown in the photo.
Connect the clevises to the outer holes in the servo output lever.
Connect the pushrods to the servo output arms as shown in the drawings.
The servo output will face toward the trailing edge when installed.
Apply threadlock to the servo output screw only.
The servo output will face toward the fl ap when the servo is installed.
Greased the servo output.
Locate the servo output arms included in the kit and cut them down as shown.
Connect the clevis to the innermost hole in the elevator servo output arm.
See also
Place the servo arm on the servo output shaft parallel to the hinge line.
Route the pushrods through the articulated barrels mounted on the servo output levers.
The aileron pushrods are connected to the servo output arms using swivel pushrod connectors.
Fit these parts together and connect the preformed wire ends to the servo output arms.
Are the servo output arm retaining screws in place and tight?
Place the servo in the opening with the servo output facing the leading edge.
Fit the servo output arms as shown, and mark the correct length of the pushrods.
Drill out the linkage holes in the servo output arms to 2 mm Ø.
Avoid moving the servo output levers by hand, as this can easily ruin the gears!
The pre-formed wire pushrod to the servo output arm, and.
Unscrew the servo output levers and cut off the unwanted arms using side-cutters.
Attach the two swivel pushrod connectors to the servo output disc, spaced about 25 mm apart.
The servo output is coupled to an elevator 75 in a conventional manner.
Connect the pre-formed aileron pushrods 28 to the outermost hole in the servo output arms.
Connect the pushrod to the servo output arm first, and then to the aileron horn.
Set the servos to centre (neutral) using a servo tester, and fit the servo output arms.
The AR600 removes servo output pulses to all channels except the throttle channel during failsafe.
Attach the guide sleeves to the servo output lever D02.
The servo output S23 thus indicates a head scanning position offset by the offset position assigning signal S34.
From there, it passes to a servo signal forming circuit 52, which generates a servo output signal S23.
You'll also be interested in:
Examples of using Output
Show more
One output will contribute to this outcome
Illuminates when output is sent to the tray
Output signals common to measuring technology are available
Examples of using Servo
Show more
Woofer servo for reduced woofer distortion
Run your full servo and arming
Servo mode partial light output settings
