Examples of 'set humidity' in a sentence
Meaning of "set humidity"
set humidity - This term refers to the desired level of moisture or water vapor content in the air. It is commonly used when adjusting settings on air conditioning systems or dehumidifiers to achieve a specific humidity level in a room or space
How to use "set humidity" in a sentence
Basic
Advanced
set humidity
Set humidity slide to low humidity setting.
It is possible to vary within certain limits the set humidity level.
Set humidity to correspond to reservoir operation.
The dehumidifier has reached a set humidity level or the bucket is full.
Set humidity slide to low humidity setting Exterior of cabinet is warm.
The air dehumidifier will not work if the set humidity value.
Check the set humidity value and set another.
Your humidifier will operate until the set humidity level is reached.
Then adjust the set humidity by using the up and down buttons.
When room relative humidity is below the by user set humidity the compressor will turn.
Check the set humidity value and set another value if required.
On the display indicates that the set humidity has not been reached yet.
When the set humidity is reached, the unit will be shut off automatically.
Each press will change the set humidity by 5.
As soon as the set humidity level is reached, it will automatically switch off.
See also
The device does not regulate according to the set humidity and / or temperature values.
Large LED display shows the set humidity and indicator lights show the operating mode.
Once set into operation, the device works until the set humidity is reached.
Digital humidistat displays set humidity level and current room humidity level.
Starting the dehumidifier & set humidity.
Humidifying operation stops when the set humidity level is reached, but air purifi cation continues.
It is normal for the humidity to vary by 5 % above or below the set humidity.
If excessive condensation forms, reduce set humidity level until condensation no longer forms.
CAUTioN, on this operation, the unit can not be set humidity level.
Once in manual mode, the Set Humidity button ( S ) will light up.
The humidfier will also stop, when the set Humidity level is reached.
Drops below the set humidity by 3.
You'll also be interested in:
Examples of using Set
Show more
These targets are set as cumulative national goals
Set days and time of regeneration or recharge
The units may be set to different channels
Examples of using Humidity
Show more
The required humidity setting is too high
Humidity is kept and can not escape
Shows actual humidity and desired setting
