Examples of 'set switch' in a sentence
Meaning of "set switch"
set switch - This phrase is commonly used in the context of electrical circuits or devices. It refers to a physical or virtual switch that can be used to control or change the settings of a set or system
How to use "set switch" in a sentence
Basic
Advanced
set switch
Set switch to the hFE position.
Slide the left set switch to to disable alarm.
Set switch to the active input.
Slide the right set switch to.
Set switch to required temperature setting low or high.
To clear the pairing settings from the headphone set switch off the headphone.
The set switch does not cancel the memory recall.
Do not push the tire pressure monitoring system set switch after installing the spare tire.
Always set switch to off position when inserting or removing bits.
Do not press the tire pressure monitoring system set switch after installing the spare tire.
Set switch to the desired position to select response curve needed.
Such limited accessibility of the set switch prevents the patient from inadvertently resetting the dosage.
You can also turn the scale off by pressing the Set switch.
Always set switch to off position when installing and removing bits.
Nothing is displayed when the Set switch is pressed.
See also
Do not set switch beyond maximum for which outfit was designed as noted on nameplate.
The unit changes each time the Set switch is pressed.
Press the Set switch to select the unit that you want to set.
The third switch under the battery is the alarm set switch N.
Slide the right set switch to Zzz position.
Set switch on stop switch assembly to DOWN.
To select the mode of synchronisation set switch to the left-hand position first-curtain synchronisation.
Set switch to desired DCA position.
Lastly, a stimulus or perceptual set switch would require a simple switch between a circle and a square.
Set switch TIME control to shorter time period.
To advance the minutes, press down the hour / minute set switch while the time is flashing.
Set switch TIME control to longer time period.
I f your dial ing system is, Set switch to.
Set switch TIME control to longer.
Confirm that the scale is turned off, and press the Set switch.
Set switch TIME control to shorter.
Confirm that the scale is turned off, and press and hold the Set switch.
Set switch to desired DCV position.
For local source automatic detection, set switch B up.
Set switch to desired ACV position.
If X is clearly smaller than 2 set switch K one step back.
Set switch to ON Connect the plug to the mains socket.
Tolerance for set switch off time 4.
Set switch to RUN or MANUAL position.
To advance the hours, pull up the hour / minute set switch.
Set switch 2 on the module to the ON position.
To advance the minutes, press down the hour / minute set switch.
Set switch 5 to the OFF position to disable the repeat alarm.
If this terminal is to be used, set Switch 1 lo.
To test alarm, set switch to OFF and turn ignition key to RUN.
If generator is equipped with a system AUTO / OFF switch, set switch to “ AUTO ” position.
Then set switch R / T to configure the unit as a transmitter or receiver.
To check the charge of the battery, set switch ( A ) briefly on and off.
Always set switch ( 5 ) to off position when installing and removing socket.
In order to use this word clock, set switch 4 to the REF V position.
You'll also be interested in:
Examples of using Set
Show more
These targets are set as cumulative national goals
Set days and time of regeneration or recharge
The units may be set to different channels
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
