Examples of 'set the channel' in a sentence
Meaning of "set the channel"
The phrase 'set the channel' typically refers to the action of selecting or tuning into a specific television or radio channel. It means to adjust the settings on a television or radio device to access a desired channel for viewing or listening. With the advancements in technology, setting the channel may also involve using various streaming platforms or digital media devices to access specific content
How to use "set the channel" in a sentence
Basic
Advanced
set the channel
Set the channel switch to any channel.
Use the button or to set the channel number.
You set the channel to invite only.
For sending IR signals to set the channel of.
You set the channel to no outside messages.
AUDIO on the card remote commander repeatedly to set the channel.
Set the channel to allow outside messages.
Causes ChanServ to set the channel topic to the one.
Set the channel on your own number.
This function allows you to set the channel you want when the receiver turns on.
Set the channel and radio signal format.
Chat Rooms Monitor chat rooms to set the channel topic and remove abusive people.
Set the channel number with the button or.
Only adjust the VOX level once you have set the channel and privacy mode.
Set the channel filter to search all channels or.
See also
This script demonstrates how to set the channel values using the Ascii Command Interface.
Set the channel fader to the inner position.
Turn Channel Selector to set the channel.
Set the channel fader to the outermost position.
This screen is used to set the channel to be tuned at the receiver wake-up.
Set the channel when necessary.
After gain and sound have been adjusted, set the channel fader to minimum again.
You set the channel to moderated.
Using the supplied screwdriver, set the Channel setting switch.
You set the channel to private.
Adjust the channel 1 GAIN knob to set the channel level.
You set the channel to secret.
If possible, use your receiver / amplifier to set the channel delay.
You set the channel to public.
When operating only a single outdoor sensor, always set the channel to 1.
You set the channel to visible.
Select [ Child Lock List ] and set the channel / input to be locked.
Set the channel fader to the nearest position towards you.
Using the supplied screwdriver, set the Channel setting switch pointer to the desired channel number.
Set the channel switch to the same position on both units.
Channel status, - Select Active to set the channel active or Inactive to disable the channel.
Set the channel on the cable box instead of with the home theater system.
Did not you set the channel to this?
Set the channel that broadcasts a clock signal and the clock will be set automatically.
EN With the power off, set the Channel.
A tuner can set the channel that is available.
Set the Channel selector to the same channel as the baby unit.
In such cases, set the channel to other than “ dv ”.
Set the channel B gain control at minimum.
Button SET to set the channel 10.
First set the channel which you would like to swap.
Set the channel select switch on the transmitter to channel A or B as required.
You can also set the channel volume with the channel volume control.
Set the Channel Switch to match the setting on your Wireless Receiver.
You can set the channel list to show only TV channels or only Radio stations.
You'll also be interested in:
Examples of using Set
Show more
These targets are set as cumulative national goals
Set days and time of regeneration or recharge
The units may be set to different channels
Examples of using Channel
Show more
A list of channel types appears on the display
Steer for the centre of the channel
Press on the desired channel to take a snapshot
