Examples of 'set the fan' in a sentence
Meaning of "set the fan"
This phrase refers to the action of adjusting or controlling the speed or direction of a fan. It is commonly used when someone wants to change the settings of a fan to increase or decrease air flow
How to use "set the fan" in a sentence
Basic
Advanced
set the fan
Set the fan and temperature to a higher.
Press the button to set the fan speed in the order of.
Set the fan and temperature to a low.
These four buttons are used to set the fan speed as follows.
Set the fan speed to highest setting.
Fourth pull will again set the fan to the OFF setting.
Set the fan to the highest speed initially.
First pull will set the fan to HI.
Set the fan on a level and dry surface.
Second pull will set the fan to MEDIUM.
Set the fan speed again.
Third pull will set the fan to LOW.
Set the fan base on a dry level surface.
Resonator Резонатор Set the fan to a vertical position.
Set the fan speed with the remote controller.
See also
Press the FAN CONTROL button to set the fan speed.
Set the fan speed to the highest setting on the right for outside air.
Wait approximately 3 minutes and set the fan as desired.
Set the fan speed that will be used when fan control is set to manual.
Wait approximately 3 minutes and set the fan speed at the desired level.
Set the fan going for a few hours to dry out the inside completely.
In this case, it is recommended to set the fan speed to AUTO.
Set the fan speed according to the using environment after consultation with your customer.
Increase the temperature Set the fan speed stage 0.
Set the fan control to High for maximum moisture removal.
For quicker hardening, set the fan to HI increasing air flow.
Set the fan control to Turbo for maximum moisture removal.
When you select the A mode, it is unnecessary to set the fan speed.
Automatically set the fan motor to LOW wind speed.
If necessary, press the FAN SPEED button to set the fan speed.
Booster level Set the fan power to the highest value for maximum air volume current.
Turn the fan Speed Control knob clockwise to set the Fan at High ( ) or Low.
Set the fan switch to the AUTO position.
For slower hardening, set the fan to MED or LO decreasing air flow.
Set the Fan Speed control to the highest setting.
To turn off the system, set the fan control dial to the 0 position.
Set the fan on the floor, on a level surface.
In “ Cooling ” and “ Fan ” modes you can set the fan speed with 2 different settings.
Set the fan and / or light on to the desired state.
When the ambient temperature exceeds 25 C, set the fan to ON.
Set the fan to the highest speed initially, then adjust in order to.
If you have set the fan to operate, set the air volume speed.
Set the fan to the highest speed initially, then adjust to maintain comfort.
Air Grille, Set the fan control knob in the DOWN.
Set the Fan Selector Switch to Position 3 if using a controller providing variable speed and / or direction.
Manually set the fan speed . This is effective only when speed is set to " Manual.
Set the fan on a stable, level surface.
Fan Mode Set the fan speed according to altitude . Available options.
Set the fan speed to the desired position Fig . 4.
Use to set the fan speed to Low, Med, High or Auto on the unit.
You'll also be interested in:
Examples of using Set
Show more
These targets are set as cumulative national goals
Set days and time of regeneration or recharge
The units may be set to different channels
Examples of using Fan
Show more
Big fan of you and your otters
We do not need to fan that flame today
Check fan blade screws for tightness
